|
10-29-2010, 04:37 PM
|
#1 |
|
Simple? What's simple?
 
Join Date: Apr 2007
Location: Southeast CT
Posts: 1,472
|
Bent shackle?
I was working under my truck last night (adjusting clutch and final tightening on all the new tranny parts, NV4500 / NP241 are in!) and noticed that the passenger's side front spring shackle is "offset" - that is, the end of the spring is about 3/4" to the left of the top of the shackle.
The spring looks square on the axle and nothing is bent - is the shackle supposed to be straight (I assume so) or offset? The driver's side is not offset.
__________________
CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder) |
|
|
|
10-29-2010, 07:14 PM
|
#2 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Re: Bent shackle?
The shackles should be straight. I am not sure if the springs are paralell or not but you may want to do some measuring between them. I would also look at the frame to see if it is possibly bent.
Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
