Lift Kit's for a 67K10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967K10 · 01-23-2003, 12:47 PM

I have a 67 K10 I would love to put about three inches of lift under. I have looked in several places and have been unable to find any kits out there. Any ideas where to look?

~Heath

**breeh** · 01-23-2003, 01:17 PM

You can use any of the kits for 69-72 except for the full spring kits. You will have to use blocks on the rear as these are different on 67-68 and nobody makes them. Some people have had custom springs made for this but be prepared to lay out some $$ if you want this. Good luck!

Pont · 01-23-2003, 03:24 PM

Exactly what Breeh said. 69 and newer front springs are the same and are readily available. Just buy the lift you want but get it without rear springs. Front springs, shocks, and rear blocks. Be sure to keep an eye on your brake hose length depending on how much lift you go with. If you ever want to lift it without running blocks in the rear (as I did), you will need to have rear springs custom made. 67-68 rear springs are 56" eye to eye and the axle centering pin is centered in the spring pack. 69 and newer are 52" eye to eye and the centering pin is offset. Good luck, keep us posted on what you decide to go with.

1967K10 · 02-16-2003, 12:48 AM

Thanks guys, that is exactly what I was hoping to find out. Am working her her it now. Here she is before her lift.

~Heath

meathead95 · 02-16-2003, 07:08 AM

sweet

john8746 · 02-16-2003, 08:29 AM

here you go try this
http://rough.roughcountry.com/69-72%...up.htm:bowtie:

1967K10 · 05-30-2003, 10:38 AM

Thanks guys, I am working on getting a kit and rear blocks now

landon4421 · 05-30-2003, 11:19 AM

I am putting a SkyJacker 4" under my '72.:p have you tryed, www.4wheelparts.com yet they might be able to help you.

1967K10 · 05-30-2003, 11:33 AM

Thanks, I will check them out.

landon4421 · 05-30-2003, 11:40 AM

Quote:

1967K10 Thanks guys, I am working on getting a kit and rear blocks now

Try and stay away from blocks if you can.

1967K10 · 06-12-2003, 05:05 PM

Landon,

I am curious to see how satisfied you are with your Skyjacker kit before I buy one. Also, what wheels and tires have you decided upon and what is your clearance like? Thanks.

~Heath

landon4421 · 06-12-2003, 05:12 PM

I have not got the lift on the truck yet. here is a pic of what the truck looked like before i started the restore. It will be the same hight when it is finished. I am having the springs powder coated, it is suppost to make the ride smoother> I am powder coating for the looks not the ride.:p

the truck has 33 mudders and a 4" lift <block> when I am done it will have a 4" spring lift <no blocks>

1967K10 · 06-12-2003, 05:27 PM

That looks good! Do you think 35's would have cleared ok?

~Heath

landon4421 · 06-13-2003, 10:04 AM

Have you looked at your truck lately? There is probally enought room for 44's with a 6" lift. I think with the 35's you should not have any problums. Mine would cut the tire when I went 4wheeling, but that was when I was jumping the truck and bouncing around on the rocks. Good luck Landon

1969 GMC · 06-13-2003, 11:32 AM

don't mean to hijack your thread, but is that your scout II landon?

landon4421 · 06-16-2003, 10:12 AM

1969 GMC, No the scout II is my friend Rob's. Why do you ask?

01-23-2003, 12:47 PM	#1
1967K10 Registered User Join Date: Jan 2003 Posts: 32	Lift Kit's for a 67K10 I have a 67 K10 I would love to put about three inches of lift under. I have looked in several places and have been unable to find any kits out there. Any ideas where to look? ~Heath Last edited by 1967K10; 06-13-2003 at 09:40 PM.

01-23-2003, 01:17 PM	#2
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	You can use any of the kits for 69-72 except for the full spring kits. You will have to use blocks on the rear as these are different on 67-68 and nobody makes them. Some people have had custom springs made for this but be prepared to lay out some $$ if you want this. Good luck! __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-23-2003, 03:24 PM	#3
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Exactly what Breeh said. 69 and newer front springs are the same and are readily available. Just buy the lift you want but get it without rear springs. Front springs, shocks, and rear blocks. Be sure to keep an eye on your brake hose length depending on how much lift you go with. If you ever want to lift it without running blocks in the rear (as I did), you will need to have rear springs custom made. 67-68 rear springs are 56" eye to eye and the axle centering pin is centered in the spring pack. 69 and newer are 52" eye to eye and the centering pin is offset. Good luck, keep us posted on what you decide to go with. __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

02-16-2003, 12:48 AM	#4
1967K10 Registered User Join Date: Jan 2003 Posts: 32	Thanks guys, that is exactly what I was hoping to find out. Am working her her it now. Here she is before her lift. ~Heath Attached Images

02-16-2003, 07:08 AM	#5
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	sweet __________________ 72 2wd blazer 72 swb 4x4

02-16-2003, 08:29 AM	#6
john8746 Registered User Join Date: Nov 2001 Location: Malaga, N.J. Posts: 171	lift kit here you go try this http://rough.roughcountry.com/69-72%...up.htm:bowtie: __________________ C/10 John N.J.

05-30-2003, 10:38 AM	#7
1967K10 Registered User Join Date: Jan 2003 Posts: 32	Thanks guys, I am working on getting a kit and rear blocks now

05-30-2003, 11:19 AM	#8
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	I am putting a SkyJacker 4" under my '72.:p have you tryed, www.4wheelparts.com yet they might be able to help you. __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

05-30-2003, 11:33 AM	#9
1967K10 Registered User Join Date: Jan 2003 Posts: 32	Thanks, I will check them out.

06-12-2003, 05:05 PM	#11
1967K10 Registered User Join Date: Jan 2003 Posts: 32	Landon, I am curious to see how satisfied you are with your Skyjacker kit before I buy one. Also, what wheels and tires have you decided upon and what is your clearance like? Thanks. ~Heath

06-12-2003, 05:12 PM	#12
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	I have not got the lift on the truck yet. here is a pic of what the truck looked like before i started the restore. It will be the same hight when it is finished. I am having the springs powder coated, it is suppost to make the ride smoother> I am powder coating for the looks not the ride.:p the truck has 33 mudders and a 4" lift <block> when I am done it will have a 4" spring lift <no blocks> Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

06-12-2003, 05:27 PM	#13
1967K10 Registered User Join Date: Jan 2003 Posts: 32	That looks good! Do you think 35's would have cleared ok? ~Heath

06-13-2003, 10:04 AM	#14
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Have you looked at your truck lately? There is probally enought room for 44's with a 6" lift. I think with the 35's you should not have any problums. Mine would cut the tire when I went 4wheeling, but that was when I was jumping the truck and bouncing around on the rocks. Good luck Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

06-13-2003, 11:32 AM	#15
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	don't mean to hijack your thread, but is that your scout II landon? __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

06-16-2003, 10:12 AM	#16
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	1969 GMC, No the scout II is my friend Rob's. Why do you ask? __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.