Blazer Body Mount Bolt Measurements

[vtblazer]

Originally Posted by mcmlxix

Ok... I have a die grinder but I didn't have any cut off wheels... I picked up some 3" wheels and a shaft/aug ... The problem I'm having is even the small 3" wheel doesn't fit into the recess for the two bolts in the driver and passenger footwells.... I ended up drilling out the others and using a punch. I will probably go the same route with the last two... but they are a larger diameter...

I've had really good results using 2" RoLoc pads on the 90 degree air tool.


Takes a little longer but you don't end up with the slices in the tub that you do with a cutting wheel/grinder approach.

[Vendetta]

Old post still giving. Love this site. Thanks.
Posted via Mobile Device