FS: Short Step Bed Sides and Fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1971Stepside** · 06-09-2003, 06:04 PM

I have three bedsides for sale. All of them are in better than average shape, but each would take body work to make them show quality (dings and etc.). I have two drivers side bed sides and one passenger side. No rust on any of them. Pics available. Please only respond if you are able and willing to purchase. I am asking $75 per bed side. Would rather not ship, but if you want to pay the shipping I guess it could be done.

I also have a passenger step fender that is rust free. It is dented at the very bottom on the back side, but could be hammer and dollied out pretty easily. I would take $75 for the fender. I also have a very clean step for the passenger side. $30

I have a drivers side fender that has no rust, but has some filler in the front of it (no cut out) to cover a rippled up dent. It is also slightly tweaked at the front corner, but could be easily pulled. I may try that before shipping it out. Again, probably a daily driver type fender. $35

Shipping is up to you, but I would rather you come and get the pieces.

Post interested messages here or PM me your email for pics. Thanks.

**1971Stepside** · 06-10-2003, 09:28 AM

hmmmm, is the price too high or just no interest?

**1971Stepside** · 06-11-2003, 08:59 AM

bring it to the top one more time...

Lightspeed · 06-11-2003, 06:35 PM

have any pics of the fenders?

**1971Stepside** · 06-12-2003, 09:42 AM

I do, but I can't attach them to the post right now. Give me your email address and I can send them to you.

**1971Stepside** · 06-12-2003, 09:44 AM

looks like I can....here you go

**1971Stepside** · 06-12-2003, 09:45 AM

pic of fenders....I have shots of the back of them too if you will send me an email...

**1971Stepside** · 06-12-2003, 09:46 AM

pic 1

**1971Stepside** · 06-12-2003, 09:47 AM

pic 1

Lightspeed · 06-12-2003, 09:14 PM

my email is anticolonel@hotmail.com

Lightspeed · 06-13-2003, 05:44 PM

ttt

**1971Stepside** · 06-13-2003, 10:36 PM

Lightspeed....I see your post. I left my disk at work with all the pics on it. I was also stuck in training all day today. I will get you pictures ASAP. If you need them right now I can take new ones in the am. I'll check back here tomorrow.

Sorry about the inconvenience.

**1971Stepside** · 06-16-2003, 10:09 AM

email sent...

Lightspeed · 06-16-2003, 10:20 AM

if possible could you check on shipping to 24333. im very interested in the driver's side fender.

**1971Stepside** · 06-16-2003, 11:14 AM

I wonder what would be the best way to try and ship a stepside fender. Will UPS take them?

Roberty · 06-16-2003, 11:18 AM

Quote:

Originally posted by 1971Stepside
I wonder what would be the best way to try and ship a stepside fender. Will UPS take them?

Fed-Ex seems to be cheaper on big/heavy items.
Robert

sniper2321 · 06-16-2003, 01:44 PM

box it up in a washer or drier box then send for $65 through Grayhound. Fedex Ups have size limet.

06-09-2003, 06:04 PM	#1
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	FS: Short Step Bed Sides and Fender I have three bedsides for sale. All of them are in better than average shape, but each would take body work to make them show quality (dings and etc.). I have two drivers side bed sides and one passenger side. No rust on any of them. Pics available. Please only respond if you are able and willing to purchase. I am asking $75 per bed side. Would rather not ship, but if you want to pay the shipping I guess it could be done. I also have a passenger step fender that is rust free. It is dented at the very bottom on the back side, but could be hammer and dollied out pretty easily. I would take $75 for the fender. I also have a very clean step for the passenger side. $30 I have a drivers side fender that has no rust, but has some filler in the front of it (no cut out) to cover a rippled up dent. It is also slightly tweaked at the front corner, but could be easily pulled. I may try that before shipping it out. Again, probably a daily driver type fender. $35 Shipping is up to you, but I would rather you come and get the pieces. Post interested messages here or PM me your email for pics. Thanks. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-10-2003, 09:28 AM	#2
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	hmmmm, is the price too high or just no interest? __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far." Last edited by 1971Stepside; 06-10-2003 at 04:23 PM.

06-11-2003, 08:59 AM	#3
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	bring it to the top one more time... __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-12-2003, 09:42 AM	#5
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	I do, but I can't attach them to the post right now. Give me your email address and I can send them to you. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-12-2003, 09:44 AM	#6
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Oh, looks like I can....here you go Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-11-2003, 06:35 PM	#4
Lightspeed Registered User Join Date: Oct 2002 Location: Virginia Posts: 226	have any pics of the fenders?

06-12-2003, 09:45 AM	#7
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	another pic of fenders....I have shots of the back of them too if you will send me an email... Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-12-2003, 09:46 AM	#8
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	bed sides pic 1 Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-12-2003, 09:47 AM	#9
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	bed side passenger pic 1 Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-12-2003, 09:14 PM	#10
Lightspeed Registered User Join Date: Oct 2002 Location: Virginia Posts: 226	my email is anticolonel@hotmail.com

06-13-2003, 05:44 PM	#11
Lightspeed Registered User Join Date: Oct 2002 Location: Virginia Posts: 226	ttt

06-13-2003, 10:36 PM	#12
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Lightspeed....I see your post. I left my disk at work with all the pics on it. I was also stuck in training all day today. I will get you pictures ASAP. If you need them right now I can take new ones in the am. I'll check back here tomorrow. Sorry about the inconvenience. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-16-2003, 10:09 AM	#13
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	email sent... __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-16-2003, 10:20 AM	#14
Lightspeed Registered User Join Date: Oct 2002 Location: Virginia Posts: 226	if possible could you check on shipping to 24333. im very interested in the driver's side fender.

06-16-2003, 11:14 AM	#15
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	I wonder what would be the best way to try and ship a stepside fender. Will UPS take them? __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."



Register or Log In To remove these advertisements.

06-16-2003, 01:44 PM	#17
sniper2321 Registered User Join Date: May 2002 Location: S.E. Fla Posts: 185	box it up in a washer or drier box then send for $65 through Grayhound. Fedex Ups have size limet.

Register or Log In To remove these advertisements.