Can I get door locks made to match my ignition key? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crakarjax · 11-04-2010, 11:00 AM

I just swapped my ignition lock cylinder out for the one from my parts truck because it was super worn. The new cylinder takes a type "E" key, which doesn't fit my existing door locks. Can I have door locks made to fit my key? If so, would it be cheaper just to buy a whole new set of locks? If not, how can I go about modifying some door cylinders to work with my key? I imagine I would need to remove the pins and replace them with pins of the right height... any idea where to get those?

Also, what year trucks or cars used the "E" keys? My '68 has type "C", and the "E" key doesn't fit the door locks on my donor '72...

TIA

68gmsee · 11-04-2010, 11:08 AM

LockDoc would know.

Mike J · 11-04-2010, 12:31 PM

see if you can rekey the old ones first- i do that all the time on VWs but I dont know about GM stuff. If not, the full lock sets are really pretty cheap- that's what I did because I wanted one key.

crakarjax · 11-04-2010, 01:03 PM

Quote:

Originally Posted by Mike J

see if you can rekey the old ones first- i do that all the time on VWs but I dont know about GM stuff. If not, the full lock sets are really pretty cheap- that's what I did because I wanted one key.

I can't rekey the old ones to match my new ign cylinder because they take different types of keys. Maybe my best bet would be to get a new C type ign cylinder and have it re-keyed to match my door? I'm pretty sure switching out the pins would be pretty easy but I can't find any source for pins online.

cdowns · 11-04-2010, 01:43 PM

rekey means you go to locksmith and he changes the pins in the tumbler so everything works on one key//yellow pages look under locksmith and give a local cfaftsman a call

**71swb4x4** · 11-04-2010, 01:47 PM

Why not just take the door locks from the parts truck too? Either way you have to pull the locks from your truck.

**Classic Heartbeat** · 11-04-2010, 02:10 PM

We have complete new ignition/door lock sets with matching keys for $29.95. WES

crakarjax · 11-04-2010, 03:11 PM

Quote:

Originally Posted by cdowns

rekey means you go to locksmith and he changes the pins in the tumbler so everything works on one key//yellow pages look under locksmith and give a local cfaftsman a call

I don't think that's possible because the difference between the C and E key types is in the groove patterns, and those I believe are cast into the lock cylinder. Here's a helpful website that I found:
http://www.camaros.org/keysandlocks.shtml

Quote:

Originally Posted by 71swb4x4

Why not just take the door locks from the parts truck too? Either way you have to pull the locks from your truck.

The door locks on the parts truck don't match the parts truck's ignition key!

Quote:

Originally Posted by Classic Heartbeat

We have complete new ignition/door lock sets with matching keys for $29.95. WES

How much do you charge for shipping to 27613 Wes, and what brand do you carry? I'm a minimalist at heart and that means re-using everything that I possibly can, but if I decide to go that route I will give you a ring.

crakarjax · 11-04-2010, 03:34 PM

While we are on this topic, I noticed (after trying for about an hour to turn it...) that the ignition cylinder on my 68 doesn't have an accessory position! What's up with that?

Beuford · 11-04-2010, 03:55 PM

Classic Ind had them. I bought an Ign and both door locks that work with 1 key for my `70 part #TK104 for $26.95 in 2008. They work great.

jorgensensc · 11-04-2010, 03:56 PM

Yes you can buy a lockset that is all keyed the same. I understand what you are saying about the key types and grooves. That is what I ran into on the suburban. I got a matching ignition/lock set, but the rear hatch is a different type key and cant be remeyed to the same keys as the other keys. They also don't repro the rear hatch locks. If I were you I would just buy a new match set and be done. JMHO.
Shawn
Posted via Mobile Device

gnstalodz · 11-04-2010, 04:11 PM

LMC has a set for $50. Can match both doors, glove box, and ignition.

**Classic Heartbeat** · 11-04-2010, 04:30 PM

Shipping would be around $10.00 WES

**LockDoc** · 11-05-2010, 11:39 AM

-
Here is some info I posted that tells what year trucks use what keyway...

http://67-72chevytrucks.com/vboard/s...d.php?t=213860

Just a technicality but the chevy lock cylinders don't use pins, they have wafers in them.

I have a couple of good used "C" keyway ignition cylinders that I could rekey to your door locks if you want to go that way. I also have a couple of extra, new door/ignition sets for $30.00 shipped and a couple of door/ignition/glovebox sets for $40.00 shipped. PM me if you are interested.

To the best of my knowledge, all 67's, and some early 68's didn't have an accessory position.

LockDoc

11-04-2010, 11:00 AM	#1
crakarjax Registered User Join Date: Dec 2009 Location: Kirkland, WA Posts: 1,302	Can I get door locks made to match my ignition key? I just swapped my ignition lock cylinder out for the one from my parts truck because it was super worn. The new cylinder takes a type "E" key, which doesn't fit my existing door locks. Can I have door locks made to fit my key? If so, would it be cheaper just to buy a whole new set of locks? If not, how can I go about modifying some door cylinders to work with my key? I imagine I would need to remove the pins and replace them with pins of the right height... any idea where to get those? Also, what year trucks or cars used the "E" keys? My '68 has type "C", and the "E" key doesn't fit the door locks on my donor '72... TIA __________________ 1968 LWB C20 / AC / Wood Bed

11-04-2010, 11:08 AM	#2
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: Can I get door locks made to match my ignition key? LockDoc would know.

11-04-2010, 12:31 PM	#3
Mike J vw guy & now c-10 guy Join Date: Sep 2008 Location: Louisville,KY Posts: 483	Re: Can I get door locks made to match my ignition key? see if you can rekey the old ones first- i do that all the time on VWs but I dont know about GM stuff. If not, the full lock sets are really pretty cheap- that's what I did because I wanted one key. __________________ '68 long fleet Finally made some progress on the build!!! My Build Thread

11-04-2010, 01:43 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Can I get door locks made to match my ignition key? rekey means you go to locksmith and he changes the pins in the tumbler so everything works on one key//yellow pages look under locksmith and give a local cfaftsman a call __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

11-04-2010, 01:47 PM	#6
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Can I get door locks made to match my ignition key? Why not just take the door locks from the parts truck too? Either way you have to pull the locks from your truck. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

11-04-2010, 02:10 PM	#7
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Can I get door locks made to match my ignition key? We have complete new ignition/door lock sets with matching keys for $29.95. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

11-04-2010, 03:34 PM	#9
crakarjax Registered User Join Date: Dec 2009 Location: Kirkland, WA Posts: 1,302	Re: Can I get door locks made to match my ignition key? While we are on this topic, I noticed (after trying for about an hour to turn it...) that the ignition cylinder on my 68 doesn't have an accessory position! What's up with that? __________________ 1968 LWB C20 / AC / Wood Bed

11-04-2010, 03:55 PM	#10
Beuford Registered User Join Date: Oct 2009 Location: Townville,Pa Posts: 284	Re: Can I get door locks made to match my ignition key? Classic Ind had them. I bought an Ign and both door locks that work with 1 key for my `70 part #TK104 for $26.95 in 2008. They work great.

11-04-2010, 03:56 PM	#11
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Can I get door locks made to match my ignition key? Yes you can buy a lockset that is all keyed the same. I understand what you are saying about the key types and grooves. That is what I ran into on the suburban. I got a matching ignition/lock set, but the rear hatch is a different type key and cant be remeyed to the same keys as the other keys. They also don't repro the rear hatch locks. If I were you I would just buy a new match set and be done. JMHO. Shawn Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-04-2010, 04:11 PM	#12
gnstalodz Registered User Join Date: Jul 2010 Location: dublin, ca Posts: 155	Re: Can I get door locks made to match my ignition key? LMC has a set for $50. Can match both doors, glove box, and ignition.

11-04-2010, 04:30 PM	#13
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Can I get door locks made to match my ignition key? Shipping would be around $10.00 WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

11-05-2010, 11:39 AM	#14
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,069	Re: Can I get door locks made to match my ignition key? - Here is some info I posted that tells what year trucks use what keyway... http://67-72chevytrucks.com/vboard/s...d.php?t=213860 Just a technicality but the chevy lock cylinders don't use pins, they have wafers in them. I have a couple of good used "C" keyway ignition cylinders that I could rekey to your door locks if you want to go that way. I also have a couple of extra, new door/ignition sets for $30.00 shipped and a couple of door/ignition/glovebox sets for $40.00 shipped. PM me if you are interested. To the best of my knowledge, all 67's, and some early 68's didn't have an accessory position. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.