SWB bed dimensions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chapster · 11-06-2010, 12:38 AM

I am looking for a few samples of measurements of inside lip to inside lip of a fleetside box. I have my narrowed rear end and wheel offsets based on a different box style and am wondering if I will have clearance issues going back to SWB.

Thanks in advance

chapster · 11-06-2010, 05:34 PM

ttt

haysonj · 11-06-2010, 05:44 PM

Not sure what you want but mine is 49 in across the box then 13 in from box to outer fender for a total of 75 in from outer fender to outer fender

chapster · 11-06-2010, 11:06 PM

sorry for the confusion, I am looking for the dimension from where the tire/wheel will contact inside of rear boxside wheelwell arcoss to opposite side wheelwell where the opposite tire/wheel would contact.

haysonj · 11-06-2010, 11:12 PM

Quote:

Originally Posted by chapster

sorry for the confusion, I am looking for the dimension from where the tire/wheel will contact inside of rear boxside wheelwell arcoss to opposite side wheelwell where the opposite tire/wheel would contact.

That would be the 49 in. dimension

chapster · 11-06-2010, 11:45 PM

Thanks,
I will go measure my set up and compare.

chapster · 11-06-2010, 11:51 PM

I just went and measured and my dif is 49" (flange to flange) and it has been narrowed. I need outside tire to tire mesurement plus clearance distance between tire and inside wheel well of box side .

chapster · 11-07-2010, 12:27 AM

Maybe this will help.

haysonj · 11-07-2010, 08:45 AM

Quote:

Originally Posted by chapster

Maybe this will help.

That would be 75 in. the box is 49 each wheel tub is 13 so 49+13+13=75

11-06-2010, 12:38 AM	#1
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	SWB bed dimensions I am looking for a few samples of measurements of inside lip to inside lip of a fleetside box. I have my narrowed rear end and wheel offsets based on a different box style and am wondering if I will have clearance issues going back to SWB. Thanks in advance __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

11-06-2010, 05:34 PM	#2
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: SWB bed dimensions ttt __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

11-06-2010, 05:44 PM	#3
haysonj Registered User Join Date: Dec 2007 Location: Santa Maria, Ca. Posts: 1,423	Re: SWB bed dimensions Not sure what you want but mine is 49 in across the box then 13 in from box to outer fender for a total of 75 in from outer fender to outer fender __________________ 69 Chevy 4x4 383 Power

11-06-2010, 11:06 PM	#4
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: SWB bed dimensions sorry for the confusion, I am looking for the dimension from where the tire/wheel will contact inside of rear boxside wheelwell arcoss to opposite side wheelwell where the opposite tire/wheel would contact. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

11-06-2010, 11:45 PM	#6
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: SWB bed dimensions Thanks, I will go measure my set up and compare. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

11-06-2010, 11:51 PM	#7
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: SWB bed dimensions I just went and measured and my dif is 49" (flange to flange) and it has been narrowed. I need outside tire to tire mesurement plus clearance distance between tire and inside wheel well of box side . __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project) Last edited by chapster; 11-06-2010 at 11:53 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.