Canada Nearly free parts

[tantrumpipeline]

Letfover parts I won't be using, all are free/trade for beer
68 cab, rusty around the window,cab mounts shot, corners and rockers are decent and could be used as patches along with the back of the cab, floor seems decent enough for patches, radio not hacked possible patch
68 in cab fuel tank, no leaks looks to be good
68 front and rear springs, also seem good unsure of height were on my truck pre tear down
all going to the scrap yard in the next week or so, so if you need any of this stuff come grab it, rather see what's useable be used than be melted down

[exploderjim]

Is it possible to get the radio area for a patch Previous owner cut mine to put in a crappy alpine CD.

[tantrumpipeline]

I'm sure I could do that for you, you're a long ways away though, was more hoping for locals due to the fact I don't wanna spend anything to get rid of old parts, I better have a good look tomorrow I did fill the cab up with parts so it could have been dented, if not, how would you like it cut and how would this work as to not cost me anything

[exploderjim]

I have no issue covering the shipping if you can get it out....if its to big a pain don't worry I can try and cut one out myself locally. Actually I will be in Calgary at the end of November if that would help?

[exploderjim]

Sorry I forgot to say cut out as much as you think is required. The guy that cut mine squared out the inside and I want to put it back to a stock radio set up.

[tantrumpipeline]

if I get home early enough tomorrow I will take somepics for you then you can highlight how much to cut and I will pull out a zip cut and maybe send it via greyhound cod? whatever worx for you, like I said any piece used is a piece not wasted, rather see it that way

[exploderjim]

Thanks I appreciate it. If you like let me know what canada post charges and I will email you the money. It's probably cheapest that way. I don't want this to consume your time or wallet.

[tantrumpipeline]

forgot it was haloween, just got home and there are kids all over, tomorrow I will take pics for ya sorry

[exploderjim]

don't worry take your time. When you can you can. I would just cut outside the radio panel so the indent is ther along with the radio holes. Probably the simplest way and gives the most material to play with. Thanks.

[tantrumpipeline]

getting home too late to get pics, if you pm me on saturday i have sat to tues off, plenty of time for pics and to cut it out and ship it for ya

[exploderjim]

No Problem...I'm not in a hurry so at your convienence.

[tantrumpipeline]

pulled the cover off today and found I somehow dented the dash when I loaded it with all the junk from my build, sorry, I may have another one for you, I'll let you know

[exploderjim]

Thanks for trying.