Bodywork Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dwcsr · 11-08-2010, 06:03 PM

I used an old frame and chopped the ends off and then welded some wheels on it. Makes for an easy to move and work around rig. That way its on the original mounts and you can bolt it down.

seeso · 11-08-2010, 09:46 PM

Quote:

Originally Posted by dwcsr

I used an old frame and chopped the ends off and then welded some wheels on it. Makes for an easy to move and work around rig. That way its on the original mounts and you can bolt it down.

That is a Slick set up right there.

11-08-2010, 06:03 PM	#1
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Bodywork Question I used an old frame and chopped the ends off and then welded some wheels on it. Makes for an easy to move and work around rig. That way its on the original mounts and you can bolt it down. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.