FS in Dallas: 5 lug disc swap kit..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 06-15-2003, 06:07 PM

SOLD!!!

I removed all these parts from my '72 shortbed today. Everything is in very good shape - you could bolt on and go - or do I like I did and repaint/refinish/restore one set while you drive, then switch over when you're ready.

You get everything pictured for a complete swap:

Upper and Lower control arms with bushings and balljoints
Spindles with turnable 5-lug rotors and good calipers/pads
Center link with good attached inner and outer tie rods
Idler arm and pitman arm

This is everything you need (less the brake booster/master cylinder) to convert your 67-70 1/2 ton to a 5 lug disc brake front end. You could literally unbolt your front end and bolt this one on if you wanted to.

This stuff is heavy. You might want to pick it up.
If you need it shipped, we could probably do it fairly cheaply ($50-$60??) through Greyhound bus lines to a terminal near you.

$125 plus shipping if needed.

You can email me directly at carpediem_00@yahoo.com

superchevy · 06-16-2003, 08:12 AM

ttt

BigRed · 06-16-2003, 08:58 AM

You selling that bed?

superchevy · 06-16-2003, 10:31 AM

No, the bed's not for sale.

superchevy · 06-17-2003, 06:31 PM

SOLD!!!
Thanks, SC.

06-15-2003, 06:07 PM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	FS in Dallas: 5 lug disc swap kit..... SOLD!!! I removed all these parts from my '72 shortbed today. Everything is in very good shape - you could bolt on and go - or do I like I did and repaint/refinish/restore one set while you drive, then switch over when you're ready. You get everything pictured for a complete swap: Upper and Lower control arms with bushings and balljoints Spindles with turnable 5-lug rotors and good calipers/pads Center link with good attached inner and outer tie rods Idler arm and pitman arm This is everything you need (less the brake booster/master cylinder) to convert your 67-70 1/2 ton to a 5 lug disc brake front end. You could literally unbolt your front end and bolt this one on if you wanted to. This stuff is heavy. You might want to pick it up. If you need it shipped, we could probably do it fairly cheaply ($50-$60??) through Greyhound bus lines to a terminal near you. $125 plus shipping if needed. You can email me directly at carpediem_00@yahoo.com Attached Images Last edited by superchevy; 06-17-2003 at 06:31 PM.

06-16-2003, 08:58 AM	#3
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	You selling that bed? __________________ Scott Shelbourne

06-16-2003, 10:31 AM	#4
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	No, the bed's not for sale. __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

06-16-2003, 08:12 AM	#2
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	ttt

06-17-2003, 06:31 PM	#5
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	SOLD!!! Thanks, SC.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.