cab mounts?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cstm68 · 11-09-2010, 01:44 AM

iv never removed my cab and i know the bed sits right on the frame without bushings, with this being said i cant get the lower body line to sit right with the line on the bed, it is about 3/4 to low, would a new set of cab mounts fix this??

Hottrucks · 11-09-2010, 05:43 AM

looks like a good place to start

**Classic Heartbeat** · 11-09-2010, 07:55 PM

New cab mounts should fix it. You should also replace your radiator core support mounts if you haven't already. WES

Richard H. · 11-09-2010, 09:43 PM

I read through your build thread and got lost on how , what you did for your track bar or watts link. The reason I ask is I took my 71 all the down and as I am putting it together I can see the bed frame is already high on the drivers side again after putting in the trac bar. Maybe a super bar would be better but I'm leaning to a watts link set up. Btw cool truck.

cstm68 · 11-10-2010, 02:15 PM

cool. ill go pick up a set of cab mounts,
wes. core support mounts are done!!
richard h. not too shure what you mean but the bed frame being higher but when i did the air ride i installed and adj rear bar.

rite now mine sits higher on the pass side due to the exhaust tube hitting the axle, i still need to fix that. also there is some sort of problem in the pass front, it wants to sit higher eversince i took out the coils the po had in there, ive replaced all controll arms/shafts and new spindals. i think it was in a fender bender at one time and i might need to have the frame tweeked.

11-09-2010, 01:44 AM	#1
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	cab mounts?? iv never removed my cab and i know the bed sits right on the frame without bushings, with this being said i cant get the lower body line to sit right with the line on the bed, it is about 3/4 to low, would a new set of cab mounts fix this?? __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

11-09-2010, 05:43 AM	#2
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: cab mounts?? looks like a good place to start __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

11-09-2010, 07:55 PM	#3
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: cab mounts?? New cab mounts should fix it. You should also replace your radiator core support mounts if you haven't already. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

11-09-2010, 09:43 PM	#4
Richard H. Spanked once Join Date: Oct 2006 Location: Intheshop, Indiana Posts: 969	Re: cab mounts?? I read through your build thread and got lost on how , what you did for your track bar or watts link. The reason I ask is I took my 71 all the down and as I am putting it together I can see the bed frame is already high on the drivers side again after putting in the trac bar. Maybe a super bar would be better but I'm leaning to a watts link set up. Btw cool truck. __________________ The ole 350 budget build.

11-10-2010, 02:15 PM	#5
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: cab mounts?? cool. ill go pick up a set of cab mounts, wes. core support mounts are done!! richard h. not too shure what you mean but the bed frame being higher but when i did the air ride i installed and adj rear bar. rite now mine sits higher on the pass side due to the exhaust tube hitting the axle, i still need to fix that. also there is some sort of problem in the pass front, it wants to sit higher eversince i took out the coils the po had in there, ive replaced all controll arms/shafts and new spindals. i think it was in a fender bender at one time and i might need to have the frame tweeked. __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.