installing bucket seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72_chevy · 06-16-2003, 10:19 PM

i found a truck in the yard with bucket seat and they have a 1/2 small rip in them in the back down low i picked up both of them for 50 bucks and took them home who do i install them, in my truck wich was factory bench seat and i put them in temporarly to see if i liek them so i might end up selling them if i dont but any help would be apperciated
thanks nick

chaptr2 · 06-17-2003, 04:06 PM

Are they factory bucket seats and if they are what type of buckets are they? Are the buckets separate like the Blazer’s or do they use a frame like the 67/68 seats do? If they are they should bolt right up. The bucket seats use the same factory boltholes as the bench seat does.

I'll have to check my stepside, which was a bench at one time. I put in a set of 67-68 CST bucket seats and they bolted right up with out any problems, but they use the frame type.

72_chevy · 06-17-2003, 09:44 PM

well they ddint bolt right up so i just drilled me some holes but thanks for the help

06-16-2003, 10:19 PM	#1
72_chevy Registered User Join Date: Dec 2002 Location: parker Posts: 87	installing bucket seats i found a truck in the yard with bucket seat and they have a 1/2 small rip in them in the back down low i picked up both of them for 50 bucks and took them home who do i install them, in my truck wich was factory bench seat and i put them in temporarly to see if i liek them so i might end up selling them if i dont but any help would be apperciated thanks nick

06-17-2003, 04:06 PM	#2
chaptr2 Registered User Join Date: Mar 2000 Location: Olalla, WA Posts: 705	Are they factory bucket seats and if they are what type of buckets are they? Are the buckets separate like the Blazer’s or do they use a frame like the 67/68 seats do? If they are they should bolt right up. The bucket seats use the same factory boltholes as the bench seat does. I'll have to check my stepside, which was a bench at one time. I put in a set of 67-68 CST bucket seats and they bolted right up with out any problems, but they use the frame type. __________________ This is only my opinion and it is subject to change. 70 GMC Short box stepside Blown 388 Stroker 72 K/5 Blazer 350/SM465/205

06-17-2003, 09:44 PM	#3
72_chevy Registered User Join Date: Dec 2002 Location: parker Posts: 87	well they ddint bolt right up so i just drilled me some holes but thanks for the help __________________ 1972 chevy 3/4 350/350 ps pb a hoss in the making 1967 dodge powerwagon 2ton 4 wheel drive(will climb over anythign)FOR SALE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.