OK regular cab power window and lock conversion

[joe231]

I have everything need to convert to power windows and locks.
Under-dash harness with lock relay from a mid 80's 1/2 ton, both door harnesses, a dual window switch, a single window switch, 2 lock switches, left and right power regulators with motors, left and right lock solenoids, an extra window motor, extra lock solenoid, and accordion boots to go between the a pillar and the doors (2).
I can get pics for those interested
I would like to get $125 plus the ride for this stuff, but I'm open to offers
Thanks!!

[brossow]

Will it work on my '79? Just bolt on and go, more or less? Nothing else needed? Interested pending details.

[joe231]

Yeah, as long as you have '77 up doors.
Does your '79 have blade fuses or the older glass ones?
I know this will plug into a blade style fuse block, not sure about the glass fuse type though. Even if it won't plug in you only have to hook up 3 wires
All time hot, switched hot, and ground.
I also have the little plug in circuit breaker for the power, it plugs in like a blade type fuse.
Posted via Mobile Device

[brossow]

Originally Posted by joe231

Yeah, as long as you have '77 up doors.
Does your '79 have blade fuses or the older glass ones?
I know this will plug into a blade style fuse block, not sure about the glass fuse type though. Even if it won't plug in you only have to hook up 3 wires
All time hot, switched hot, and ground.
I also have the little plug in circuit breaker for the power, it plugs in like a blade type fuse.
Posted via Mobile Device

Haven't even looked at the fuse block, so no idea. Doesn't sound too complicated regardless. Check your PMs in a minute.

Brent

[joe231]

Sold!!!
Thanks Brent!!
Posted via Mobile Device

[joe231]

Brent here are some pics if you are interested.
The plan is to get this stuff shipped to you today
Thanks again!

[brossow]

Thanks! No hurry -- just another box to pack away somewhere before winter.

[joe231]

I know that feeling all too well