Project 67 DRGNWGN - 67 Burban!!

[kev2809]

no offense taken! i do plan on 4 linking it in the future, along with a front z. i havent done it now because the rear will sit lower than the front, which i do not want. what problems did you have with panhard bar and stock arms? ive seen a lot of guys on here with that setup but never really asked about how it rides or handles.

the bags are actually brand new technically, never seen the road. i put them in about 10 months ago, never driven on. i air them up and down about every week or 2. they should be fine.

[hotrodchevy1999]

hate to here about the grinder deal glad to hear it wasnt bad bad and u r ok hope to see some more build pics of your Burban

[71baggeddime]

Originally Posted by kev2809

no offense taken! i do plan on 4 linking it in the future, along with a front z. i havent done it now because the rear will sit lower than the front, which i do not want. what problems did you have with panhard bar and stock arms? ive seen a lot of guys on here with that setup but never really asked about how it rides or handles.

the bags are actually brand new technically, never seen the road. i put them in about 10 months ago, never driven on. i air them up and down about every week or 2. they should be fine.

Nice rig.... thinkin about buyin a burban to hall the family and 71 with. I ran the stock trailing arms with 2 inch blocks, pan hard and a small step notch before i 4 linked and did the full 10 in notch and my truck rode fine. with the exception of the typical pan hard bar issues. keep up the good work, it motivates me to get off my ass and get back on mine.