|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
11-15-2010, 01:26 PM
|
#1 |
|
Future TOTM Winner
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
|
Re: 5.3 with sm465 4 speed?
Good to know!
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com |
|
|
|
11-15-2010, 05:44 PM
|
#2 |
|
Moderator
 
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,920
|
Re: 5.3 with sm465 4 speed?
to everybody, don't forget to look at Novak Adapter's website, it's awesome and a wealth of info about 4x4 LSx swaps. Just don't fall into the trap about needing their expensive stuff.
I do want to update ya'll on this swap though. The 4.8/6.0L flywheel has poor threads for the 3/8 shoulder bolts for the pressure plate, they sit back in the flywheel itself and not on the meaty thick spacer part (sorry, you would have to be holding one to see  ). Every bolt set I found was 1" and this just didn't cut it on my flywheel, not enough bite. I had to order a set of Grade 9, 3/8 x 1.5" bolts from Mcmaster-carr.
__________________
'86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids
Last edited by LEEVON; 11-15-2010 at 05:48 PM. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
