WA 9.75 x 16.5 Slots - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 11-12-2010, 02:11 AM

Four of these in very nice condition...little to no curb rash. $250 + ride.

**special-K** · 11-12-2010, 09:03 AM

Great price! And,they ship cheaper than steel wheels by far. If I wasn't sittin' on a set I'd be taking these for sure. If I had more cash I'd but them anyway!

**chevy2tom** · 11-12-2010, 09:53 AM

2wd or 4wd offset?
Posted via Mobile Device

stllookn · 11-12-2010, 12:07 PM

I will measure the back spacing but in those years they were all the same. With a 33x12.5x16.5 tire they sit with the tire bulge flush with the fender lip and the tread inside the wheel well. I will post some pics this evening.

2000tj · 11-12-2010, 10:58 PM

I will take them pending shipping to 28806.

swamp rat · 11-12-2010, 11:16 PM

I was wondering about the offset last night cause i was concerned about the tread being outside the fenderwell as they are wider than my current set of Ultras. I'm gonna regret not sending you a PM last night i think.. Pm sent, next in line..

stllookn · 11-13-2010, 12:13 AM

Back-spacing is 4.875 in. The bead to bead distance is 9.75 in. and the overall rim width is 11.125 in. The tread will not stick out beyond the body as shown in my picture with a 12.5 in. wide tire. The tread is under the wheel well and the tire side wall is about flush with the outer edge of the fender. The rearend is narrower and the tires pretty much sit inside the wheel well.

Calculating shipping to 28806.

swamp rat · 11-13-2010, 12:32 AM

Are tho's 35" tires or 33's??

stllookn · 11-13-2010, 12:34 AM

Those are 33 x 12.5 x 16.5 tires.

2000tj · 11-13-2010, 01:24 AM

PM sent.

swamp rat · 11-13-2010, 01:50 AM

Same size tire just not sure how me having a 4x4 will affect the backspacing issue..

72freak · 11-13-2010, 07:09 AM

Shipping should average $17-$20 dollars per wheel most anywhere uis the US if you use FED-Ex.

**chevy2tom** · 11-13-2010, 10:24 AM

If the other guys pass I'll take them.

Rodk65 · 11-13-2010, 11:26 AM

Put me in line.

stllookn · 11-13-2010, 01:46 PM

Code:

Shipping should average $17-$20 dollars per wheel most anywhere uis the US if you use FED-Ex.

They were my favorite and least expensive shipper but they have raised their rates. These wheels box at 18x18x12 and weigh 27 lb. FedEx Ground now charges $37/ea. If you can get your parts in a USPS flat rate box they are now the lowest price...and the boxes are FREE!!!!! I just sent some pistons and rods to bigunde in two flat rate boxes for a total of $20.80. FedEx Ground was $40+.

CG · 11-13-2010, 07:03 PM

Nice looking mags. I had a set of those I sold to a board member that put them on his burb. They sure looked great. Perfect addition for the classic look.

(Wish I woulda kept em now)

swamp rat · 11-13-2010, 07:22 PM

Did 2000tj take em? Be back later tonight..

PortHeadlight · 11-13-2010, 08:50 PM

Here's the ones CG sold me..

2000tj · 11-14-2010, 12:37 AM

I am definately taking the rims. What method of payment do you prefer?

2000tj · 11-15-2010, 01:09 AM

PM sent.

Duncan and son · 11-15-2010, 10:17 AM

stllookn said he sold his. We have the exact same wheels and will make the same offer he did
Thanks Paul and Jason

2000tj · 11-15-2010, 11:10 PM

Paypal sent.

11-12-2010, 02:11 AM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	9.75 x 16.5 Slots Four of these in very nice condition...little to no curb rash. $250 + ride. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

11-12-2010, 09:03 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: 9.75 x 16.5 Slots Great price! And,they ship cheaper than steel wheels by far. If I wasn't sittin' on a set I'd be taking these for sure. If I had more cash I'd but them anyway! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-12-2010, 09:53 AM	#3
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: 9.75 x 16.5 Slots 2wd or 4wd offset? Posted via Mobile Device

11-12-2010, 12:07 PM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 9.75 x 16.5 Slots I will measure the back spacing but in those years they were all the same. With a 33x12.5x16.5 tire they sit with the tire bulge flush with the fender lip and the tread inside the wheel well. I will post some pics this evening. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

11-12-2010, 10:58 PM	#5
2000tj Registered User Join Date: Jul 2009 Location: Wellington, CO Posts: 108	Re: 9.75 x 16.5 Slots I will take them pending shipping to 28806.

11-12-2010, 11:16 PM	#6
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 9.75 x 16.5 Slots I was wondering about the offset last night cause i was concerned about the tread being outside the fenderwell as they are wider than my current set of Ultras. I'm gonna regret not sending you a PM last night i think.. Pm sent, next in line.. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-13-2010, 12:13 AM	#7
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 9.75 x 16.5 Slots Back-spacing is 4.875 in. The bead to bead distance is 9.75 in. and the overall rim width is 11.125 in. The tread will not stick out beyond the body as shown in my picture with a 12.5 in. wide tire. The tread is under the wheel well and the tire side wall is about flush with the outer edge of the fender. The rearend is narrower and the tires pretty much sit inside the wheel well. Calculating shipping to 28806. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 11-13-2010 at 12:18 AM.

11-13-2010, 12:32 AM	#8
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 9.75 x 16.5 Slots Are tho's 35" tires or 33's?? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's Last edited by swamp rat; 11-13-2010 at 12:32 AM.

11-13-2010, 12:34 AM	#9
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 9.75 x 16.5 Slots Those are 33 x 12.5 x 16.5 tires. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

11-13-2010, 01:24 AM	#10
2000tj Registered User Join Date: Jul 2009 Location: Wellington, CO Posts: 108	Re: 9.75 x 16.5 Slots PM sent.

11-13-2010, 01:50 AM	#11
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 9.75 x 16.5 Slots Same size tire just not sure how me having a 4x4 will affect the backspacing issue.. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-13-2010, 07:09 AM	#12
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 9.75 x 16.5 Slots Shipping should average $17-$20 dollars per wheel most anywhere uis the US if you use FED-Ex. __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere! Last edited by 72freak; 11-13-2010 at 07:10 AM.

11-13-2010, 10:24 AM	#13
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: 9.75 x 16.5 Slots If the other guys pass I'll take them.

11-13-2010, 11:26 AM	#14
Rodk65 Registered User Join Date: Apr 2010 Location: Holmen, WI Posts: 212	Re: 9.75 x 16.5 Slots Put me in line. __________________ ROD 1969 K10 4x4 Short Fleet. Tuned Port Injection 350/700R4, Cruise, tilt and factory A/C. 1971 C20 Camper Special. 350/350. SOLD 2002 Chevy Tahoe LT

11-13-2010, 01:46 PM	#15
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 9.75 x 16.5 Slots Code: Shipping should average $17-$20 dollars per wheel most anywhere uis the US if you use FED-Ex. They were my favorite and least expensive shipper but they have raised their rates. These wheels box at 18x18x12 and weigh 27 lb. FedEx Ground now charges $37/ea. If you can get your parts in a USPS flat rate box they are now the lowest price...and the boxes are FREE!!!!! I just sent some pistons and rods to bigunde in two flat rate boxes for a total of $20.80. FedEx Ground was $40+. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

11-13-2010, 07:03 PM	#16
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,872	Re: 9.75 x 16.5 Slots Nice looking mags. I had a set of those I sold to a board member that put them on his burb. They sure looked great. Perfect addition for the classic look. (Wish I woulda kept em now) __________________ … … … … … … … … ... … … … … … … … … … … …

11-13-2010, 07:22 PM	#17
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 9.75 x 16.5 Slots Did 2000tj take em? Be back later tonight.. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-13-2010, 08:50 PM	#18
PortHeadlight Registered User Join Date: Nov 2007 Location: Cape Elizabeth, Maine Posts: 196	Re: 9.75 x 16.5 Slots Here's the ones CG sold me..

11-14-2010, 12:37 AM	#19
2000tj Registered User Join Date: Jul 2009 Location: Wellington, CO Posts: 108	Re: 9.75 x 16.5 Slots I am definately taking the rims. What method of payment do you prefer?

11-15-2010, 01:09 AM	#20
2000tj Registered User Join Date: Jul 2009 Location: Wellington, CO Posts: 108	Re: 9.75 x 16.5 Slots PM sent.

11-15-2010, 10:17 AM	#21
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: 9.75 x 16.5 Slots stllookn said he sold his. We have the exact same wheels and will make the same offer he did Thanks Paul and Jason __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

11-15-2010, 11:10 PM	#22
2000tj Registered User Join Date: Jul 2009 Location: Wellington, CO Posts: 108	Re: 9.75 x 16.5 Slots Paypal sent.

Register or Log In To remove these advertisements.