![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
" SHOW ME"
Join Date: Jan 2003
Location: shelbyville illinois
Posts: 2,624
|
hey all you 4x4 guys,, heres the truck you need,, ha ha ha
hey fellas,, little help here, i am getting ready to list an 85 k30 on ebay, shes a single wheel 30, dana 60 up front, 14 bolt out back, 205, deep pan 400, 454 with air, cab is in really nice shape with a little rot in the corners, rear wheel wells are pretty dang rusty ,5th wheel ,, mint take off tail gate, driver door has a dent , truck is dark blue with a white top, trus=ck should run great once i get the new fuel pump on it, air works fine, its a pretty plain jane truck but it has all the goodies of every 4 wheelers dreams,,, 14 bolt , 400, 205 ,,DANA 60, A BIG BLOCK,, WITH AIR !!!!!!!!!!! ,,, any ways,, i am going to be putting it on ebay,, what do you guys think i should put the reserve at,, ill try to post some pics,, but just a rough estimate would be appreciated,, i know what the individule parts should bring,, but i dont have a clue what it would all be together as a working unit ,, running driving truck would be,,any and all info is greatly appreciated
thanks mac |
![]() |
![]() |
![]() |
#2 |
Too many is never enough!
Join Date: May 2003
Location: Idaho Falls, ID
Posts: 455
|
If you know the sum of the parts for the 14FF, D60, 400/205, 454, I'd add em up and ask at least that. My calculations bring it to about $3500 if it's a real good runner. If I were bidding though, probably wouldn't want to pay more than about $3K. I'd want to try and make some money back parting the rest and doesn't sound like there is too much to be had after the drivetrain is removed. Just my .02. Good luck. I'll be looking for it.
|
![]() |
![]() |
![]() |
#3 |
" SHOW ME"
Join Date: Jan 2003
Location: shelbyville illinois
Posts: 2,624
|
thanks lance, me and you are thinkin along the same lines,, i was thinking of a 3000 dollar reserve,, ill post it on the board when i put it on
|
![]() |
![]() |
![]() |
#4 |
N9PHW
Join Date: Jan 2003
Location: PNW USA
Posts: 131
|
There is a truck just like it in UT with less rust going for about $1500 right now. I doubt it will top $2000 as a complete truck. It would be worth more if you parted it out yourself rather than try to sell it whole. A whole truck is NEVER worth the sum of its parts because the value of the parts usually include labor to remove them.
__________________
"I got it one piece at a time and it didn't cost me a dime..." |
![]() |
![]() |
![]() |
#5 |
Too many is never enough!
Join Date: May 2003
Location: Idaho Falls, ID
Posts: 455
|
If there was a one ton for $1500 with a D60, big block, 400TH/205, 14FF, that runs good, I'd jump on it in a heartbeat. I just sold a D60 from a Dodge for $1K and I gave em a good deal (had new bearings, seals, etc...). Here in Colorado a $1500 or even a $2000 1 ton with a 60 would last about 2 seconds. Stick with you're $3K reserve. If it looks like it might not be met. Drop it down to $2500 but I wouldn't go lower than that.
|
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Jul 2002
Location: SE NM
Posts: 769
|
Quote:
__________________
The more I learn about women, the more I love my truck. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|