Control Arm Shaft rebuild - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smokinstang70 · 11-16-2010, 05:35 PM

I have pulled my upper and lower (Stock) control arms apart for paint... I would like to replace the rubber seals on the shafts... where can I buy just the rubber seals?

Thanks

**BIG ORANGE** · 11-16-2010, 05:44 PM

Got mine at Advance,,,,,TRW

bsteele · 11-16-2010, 05:45 PM

I couldn't find just the rubber seals. I bought the whole kit and replaced it all on my tops. Got a pretty good deal at the local NAPA.

smokinstang70 · 11-16-2010, 10:43 PM

Anyone else? I'm getting desperate... I wasn't planning on $75 each for lower shafts and $51 each for the uppers... really just looking to rebuild what i have.

ideas?

Thanks

raycow · 11-17-2010, 02:11 PM

I got mine from LMC a few years ago. Look at items #7 and #27.
http://www.lmctruck.com/icatalog/cb/full.aspx?Page=138.

Ray

**Clyde65** · 11-17-2010, 04:05 PM

What I was told was to visually inspect them real good if your going with original, just because they will stress crack. just FYI.

TobyArnot · 11-18-2010, 07:33 PM

Quote:

Originally Posted by BIG ORANGE

Got mine at Advance,,,,,TRW

Hey Big Guy - Advance has Moog, TRW, & OE (she said made by TRW?). Which one's ta get, huh?

Thanks,

Toby

11-16-2010, 05:35 PM	#1
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Control Arm Shaft rebuild I have pulled my upper and lower (Stock) control arms apart for paint... I would like to replace the rubber seals on the shafts... where can I buy just the rubber seals? Thanks

11-16-2010, 05:45 PM	#3
bsteele Registered User Join Date: Feb 2009 Location: Kershaw, South Carolina Posts: 113	Re: Control Arm Shaft rebuild I couldn't find just the rubber seals. I bought the whole kit and replaced it all on my tops. Got a pretty good deal at the local NAPA.

11-16-2010, 10:43 PM	#4
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Control Arm Shaft rebuild Anyone else? I'm getting desperate... I wasn't planning on $75 each for lower shafts and $51 each for the uppers... really just looking to rebuild what i have. ideas? Thanks

11-17-2010, 02:11 PM	#5
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: Control Arm Shaft rebuild I got mine from LMC a few years ago. Look at items #7 and #27. http://www.lmctruck.com/icatalog/cb/full.aspx?Page=138. Ray __________________ Live more responsibly. Eat lower on the food chain. Eat vegetarians.

11-17-2010, 04:05 PM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Control Arm Shaft rebuild What I was told was to visually inspect them real good if your going with original, just because they will stress crack. just FYI. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

11-16-2010, 05:44 PM	#2
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Control Arm Shaft rebuild Got mine at Advance,,,,,TRW __________________ Things happen for a reason!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.