Wheels 69 gmc 3/4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mikewarme · 11-12-2010, 11:50 PM

Looking for opinions for wheels guys.

Option 1 use oem wheels and buy refurbished center caps. (Dog dish type)

Option 2 American Racing Outlaw II's ( Will the offset be correct?)

Option 3 1999-2009 Chrome OEM wheels with GMC center caps

This is a 3/4 ton so it is 8 lug. I don't want to use spacers or anything so looking for ideas of direct swap wheels that someone else has done without problems

Mike

steves1967 · 11-13-2010, 12:51 AM

I had the 99-04? Aluminum wheels on my 3/4 ton. The rear center caps wouldn't fit with the Dana 60 rearend, the hubs stuck out too far, so I picked up a set of 1" spacers and then they fit. Also the wheels dont have the right offset so they tuck in too much for me, I added a 1" spacer and that brought them out to almost flush with the bed side.

dougo · 11-13-2010, 02:04 AM

It's two wheel drive? I have a set of weld wheels (w tires) that were on my burb. 16x8 with 33s bfg all terrians. They looked good, I just decided to go a different route. I should mention.... my burb is 4x4.
Posted via Mobile Device
Posted via Mobile Device

factorystock · 11-13-2010, 03:46 PM

The factory dog dish caps always look good. A set mid 80's 16" wheels are plentiful and have no fit issues.

basemodel67 · 11-13-2010, 08:24 PM

What about some H2 wheels? Put the newer style truck center caps on for a nice looking cheap combo.

They are 17" x 8.5" and will fit good under the rear... not sunk in like the newer stock skinnies!

mikewarme · 11-13-2010, 10:58 PM

Quote:

Originally Posted by factorystock

The factory dog dish caps always look good. A set mid 80's 16" wheels are plentiful and have no fit issues.

You think the white ones will go with my truck. BTW the truck is a factory color. What they called Saddle Poly. I do have the orignal rims so it would be easy to re-paint and get the caps.

Mike C · 11-14-2010, 09:30 PM

I had the polished Alcoas on my 70 GMC 3/4 ton. I think they are a timeless wheel design that looks good on anything. When I sold the truck, I put the Alcoas on my '02 GMC 2500 HD, and now they reside on my '85 Crew Cab farm truck.

factorystock · 11-20-2010, 12:39 PM

Wheel color and hubcap color were argent silver for 1968 and 1969. The photo posted shows a 1969 GMC 3/4 when new with argent silver wheel and cap. In 1970, wheel and cap color was changed to white. However it is possible some late 69's might have came with the new white color also. I believe the argent silver would best blend with your color.

11-12-2010, 11:50 PM	#1
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Wheels 69 gmc 3/4 Looking for opinions for wheels guys. Option 1 use oem wheels and buy refurbished center caps. (Dog dish type) Option 2 American Racing Outlaw II's ( Will the offset be correct?) Option 3 1999-2009 Chrome OEM wheels with GMC center caps This is a 3/4 ton so it is 8 lug. I don't want to use spacers or anything so looking for ideas of direct swap wheels that someone else has done without problems Mike Attached Images

11-13-2010, 12:51 AM	#2
steves1967 Registered User Join Date: Dec 2001 Location: Manteca, Ca USA Posts: 305	Re: Wheels 69 gmc 3/4 I had the 99-04? Aluminum wheels on my 3/4 ton. The rear center caps wouldn't fit with the Dana 60 rearend, the hubs stuck out too far, so I picked up a set of 1" spacers and then they fit. Also the wheels dont have the right offset so they tuck in too much for me, I added a 1" spacer and that brought them out to almost flush with the bed side. __________________ '71 Chevy 3/4 Ton Longbed '22 Chevy Tahoe RST '67 Firebird- 8 sec street car '24 GMC CC 4x4 Duramax Dually

11-13-2010, 02:04 AM	#3
dougo Registered User Join Date: Feb 2010 Location: Southern California Posts: 543	Re: Wheels 69 gmc 3/4 It's two wheel drive? I have a set of weld wheels (w tires) that were on my burb. 16x8 with 33s bfg all terrians. They looked good, I just decided to go a different route. I should mention.... my burb is 4x4. Posted via Mobile Device Posted via Mobile Device __________________ Doug '72 GMC K2500 Suburban 4x4

11-13-2010, 03:46 PM	#4
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,378	Re: Wheels 69 gmc 3/4 The factory dog dish caps always look good. A set mid 80's 16" wheels are plentiful and have no fit issues. Attached Images

11-13-2010, 08:24 PM	#5
basemodel67 Factory Strippers Rule! Join Date: Mar 2009 Location: Shingle Springs, CA Posts: 707	Re: Wheels 69 gmc 3/4 What about some H2 wheels? Put the newer style truck center caps on for a nice looking cheap combo. They are 17" x 8.5" and will fit good under the rear... not sunk in like the newer stock skinnies! __________________ "Feast your eyes on a feast of smoke." 67 Chevy Short Fleet PLAN: LQ9, 4L60, D60 Looking for School Bus Gauges - Help me out! Last edited by basemodel67; 11-13-2010 at 08:26 PM.

11-14-2010, 09:30 PM	#7
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,723	Re: Wheels 69 gmc 3/4 I had the polished Alcoas on my 70 GMC 3/4 ton. I think they are a timeless wheel design that looks good on anything. When I sold the truck, I put the Alcoas on my '02 GMC 2500 HD, and now they reside on my '85 Crew Cab farm truck. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

11-20-2010, 12:39 PM	#8
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,378	Re: Wheels 69 gmc 3/4 Wheel color and hubcap color were argent silver for 1968 and 1969. The photo posted shows a 1969 GMC 3/4 when new with argent silver wheel and cap. In 1970, wheel and cap color was changed to white. However it is possible some late 69's might have came with the new white color also. I believe the argent silver would best blend with your color.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.