IN Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More

[Todd68Chevy]

Originally Posted by ralphie628

Well just need drivers side. its the small latch that the door handle attatches to on the in side of the door. On the picture its on the left side.

also any good throttle cable and or bracket that holds the cable in place that bolts on to the intake manifold? thanks

Ok, I was not thinking about that part. Thanks for the picture so I know we are talking about the same part. I have 2 72 trucks so I will try to get them check tonight after work. Thanks

[projectjimmie68]

Do you have any transmission lines? Thanks Projectjimmie

[spectra170]

How is the rear end on the 3/4 ton should be an ho52? What gears, and would you sell just the center section?
Thanks

[Todd68Chevy]

Originally Posted by ralphie628

Are the door latch regulators any good? thanks

Ralphie, I did not get them check last night. I got home late and the weather was crap. I will get them checked as soon as I can. Thanks, Todd

Originally Posted by projectjimmie68

Do you have any transmission lines? Thanks Projectjimmie

Sorry but I still do not have any good transmission lines. I will keep you in mind if I find any. Thanks, Todd

Originally Posted by spectra170

How is the rear end on the 3/4 ton should be an ho52? What gears, and would you sell just the center section?
Thanks

This truck has a 14 bolt rear end. I do have 2 other 3/4 tons that do have the Eaton rear ends. One is a 4.10 ratio No-Spin locker in a 1969. The other one is an open rear end that I have not found out the ratio yet that is in a 1967 chassis. I do have another guy interested locally. I will let you know more as soon as I can get the gear ratio checked in the 67. I have shipped one of these complete hoghead sections before and it cost $125.00 for shipping alone to Virginia. I will let you know as soon as I can. Thanks, Todd