The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-16-2003, 10:29 PM   #1
oldsub86
Registered User
 
Join Date: Dec 2002
Location: Canada
Posts: 695
Whining and complaining

My truck has developed an exhaust leak. It is on the engine rather than on the pipes so far as my ears can tell me. I changed the flange doughnut tonight but that didn't help so I guess it must be either the manifold to head gasket or the heat riser gasket between the intake and exhaust.

Sprayed the carb with some cleaner, ran out without finishing the job right. Decided to check the screws on the top of the carb to see if they were tight and one of them is stripped. Pain in the you know what.

My truck needs lots of things and these were not even on my mental list of things to get started on.

Done whining now.
__________________
1968 Chevy - 292 with a powerglide
oldsub86 is offline   Reply With Quote
Old 06-16-2003, 10:34 PM   #2
Class of 69
Registered User
 
Class of 69's Avatar
 
Join Date: Mar 2003
Location: Stillwater MN
Posts: 1,166
I quit making lists, cause with all the everyday things to fix, I never get to the list!!! Just think tho, 8 more posts, and you'll be a senior member!!!
__________________
69 GMC K10 ..some restoration required....still..
Class of 69 is offline   Reply With Quote
Old 06-16-2003, 10:39 PM   #3
Gee_Emm
Account Suspended
 
Join Date: Sep 2000
Posts: 4,002
It sounds like too much work, you should just sell it to me.
Gee_Emm is offline   Reply With Quote
Old 06-16-2003, 10:40 PM   #4
70c10
67-72 Addict!
 
70c10's Avatar
 
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
I can definitely relate. Make a list and try to stick to it!
__________________
Jim

1970 C/10 Fleetside w/Ghost Flames
Lowered 4.5" front and 4" rear (Raked)
355/350 Turbo w/shift kit
10" Redneck Performance Verter w/2500 stall
Hooker Super Comps part#2808-1
Performer RPM Air-Gap
12 Bolt w/3:73 gears- Eaton Posi
Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads
70c10 is offline   Reply With Quote
Old 06-16-2003, 10:56 PM   #5
jewels.
Registered User
 
jewels.'s Avatar
 
Join Date: Jul 2001
Location: Munster, IN
Posts: 1,100
did you know?

did you know that all the "top successful professionals" say --- don't make a big list --- just list a few things to do each day or over the weekend --- that way, things will get accomplished faster.

its worked for me so far, probably because is just an excuse to not have to start makin that list! hee hee

jewels.

p.s. i aint a 'professional'
__________________
68 C10 Red Step 350 my first child & main focus
58 3200 Apache LWB Step the upcoming project
jewels. is offline   Reply With Quote
Old 06-16-2003, 11:42 PM   #6
Low68
Registered User
 
Low68's Avatar
 
Join Date: May 2001
Location: Arizona
Posts: 758
I am going to agree with Jewels on that. Never make a big list or it will slow you down. It always seems to do that to me atleast.
Low68
__________________
Build Thread
Low68 is offline   Reply With Quote
Old 06-17-2003, 08:31 AM   #7
Huck
Senior Member
 
Huck's Avatar
 
Join Date: Jun 2001
Location: Shelbyville, KY
Posts: 3,269
Lists----well my list starts out with checking the oil and coolant and in the process of opening the hood, I get some silicone spray to lub the hood latch, while getting that I notice that I didn't finish hooking up the 220 line for the welder so I grap some tools to do that only to think about it and decide that I could just tap off the compressor 220 line on the other side of the barn so I get the tape measure to see how far that line would need to be. With the tape measure in hand, I also realize that a few overhead 2x6's could allow for some overhead storage of stuff so I grab the step ladder and try to measure the span for the 2x6's. At ten feet the tape measure is LIMP (relate?). While up on the ladder, my wife calls me to tell me I have a phone call---always happens when my hands are greased up or I'm like trying to get the transmission lined up. I go answer the dumb phone then back to the barn with my list of checking the oil and coolant. Now what the heck is that ladder, tape measure, 220 line, etc. doing in the middle of the floor? They are not on my list?? HUCK
Huck is offline   Reply With Quote
Old 06-17-2003, 08:55 AM   #8
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,979
Boy can I relate to that Huck!
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 06-20-2003, 04:19 PM   #9
jimfulco
Registered User
 
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
I have to make a list or I'll forget everything. 'Course now I can't remember where I put the d@mn list.
jimfulco is offline   Reply With Quote
Old 06-20-2003, 04:45 PM   #10
71GMC_3/4T
Weapons Of Construction
 
71GMC_3/4T's Avatar
 
Join Date: Apr 2000
Location: Colorado, USA
Posts: 1,095
Huck, you and I must come from a very similar mold!
Most of my spare time is spent putting away all the tools that are still left out from the last project. While I'm putting them away, I usually think up with 5 more projects and then start to work on 2 of them, only to end up with more tools out on the bench, floor, tailgate, etc than were out when I started putting all of them away. This way, I never run out of things to do. I just run out of beer to drink while doing them!
__________________
1971 GMC 2500, 402/TH400 4.10 Daily Driver
Lafayette, CO
71GMC_3/4T is offline   Reply With Quote
Old 06-20-2003, 05:11 PM   #11
mocwon
Keep On Truckin'
 
mocwon's Avatar
 
Join Date: Mar 2003
Location: Buda, Texas
Posts: 1,354
CRS

I suffer from CRS (Can't Remember S....) so if I don't write it down I don't have much of a chance. I just hope I can remember where I parked as I leave the plant today....
__________________
Just Passin' Thru
Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....
mocwon is offline   Reply With Quote
Old 06-20-2003, 10:45 PM   #12
Class of 69
Registered User
 
Class of 69's Avatar
 
Join Date: Mar 2003
Location: Stillwater MN
Posts: 1,166
LMAO...Huck hit er right on the head...sequences, the story of my life!!! 71 GMC... I about quit putting the tools away for about the same reason!! My wife, or anybody for that matter, walks in my shop and say's "how the heii do you know where anything is in here"?? Because I'm the last one to use it, and know where I put it!! HaHa!! Where the heck is that ratchet??!! I've had CRS all my life, and now I think the big A is kicking in! At least my hair isn't the only thing I'm loosing! I feel better! I'm not the only one out there!
__________________
69 GMC K10 ..some restoration required....still..
Class of 69 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com