Special tool for ignition bezel?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1950ChevySuburban · 12-14-2010, 11:17 AM

Hey all! Looking for that tool to tighten my always loose ignition bezel on my '72 Pickup. I don't know what they're called or what they look like. Something that engages the three grooves I s'pose..........

Thanks! John

ls1nova71 · 12-14-2010, 11:23 AM

Here you go. http://cgi.ebay.com/ebaymotors/ignit...mZ150431127651

Putter · 12-14-2010, 02:11 PM

I bought one, used it once. Then 'stored' it. Now I can't find it. Figures!!!

Longhorn Man · 12-14-2010, 02:42 PM

not a bad price

1950ChevySuburban · 12-14-2010, 03:34 PM

Good deal! Got it, in the mail now. Thanks for the fast help!
John

RED67 · 12-14-2010, 05:08 PM

just bought one......I was having hell trying to get that off

oldblue1968chevy · 12-14-2010, 05:29 PM

Huh, I got by with a screwdriver and hammer..

Andy4639 · 12-14-2010, 06:24 PM

When I take them off I use Needle-Nose Pliers . I thought that was the speacial tool you were looking for!

70chevytruck · 12-14-2010, 10:08 PM

Me too...needle nose plyers and three hands.....

Bus Ted Knuckle · 12-14-2010, 10:19 PM

according to the ebay listing for that tool, "Show gudges notice".

May have to invest in one of those, but a screwdriver and hammer have never let me down.

**Dieselwrencher** · 12-14-2010, 10:21 PM

Thanks for the link ls1nova71. I purchased one. I have fought a few of these, no longer.

cerjio · 12-14-2010, 10:27 PM

now that i seen what one looks like I think I can make my own

**Dieselwrencher** · 12-14-2010, 10:37 PM

Personally, for $20 I've got way to many other things to do.

Spoof · 12-15-2010, 02:01 AM

Yeah the PO of my truck used a hammer and screwdriver too. I ordered a new bezel and an ign. bezel tool along with a gauge bezel tool.

12-14-2010, 11:17 AM	#1
1950ChevySuburban Registered User Join Date: Feb 2010 Location: Tucson, AZ Posts: 32	Special tool for ignition bezel?? Hey all! Looking for that tool to tighten my always loose ignition bezel on my '72 Pickup. I don't know what they're called or what they look like. Something that engages the three grooves I s'pose.......... Thanks! John

12-14-2010, 11:23 AM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: Special tool for ignition bezel?? Here you go. http://cgi.ebay.com/ebaymotors/ignit...mZ150431127651

12-14-2010, 02:11 PM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Special tool for ignition bezel?? I bought one, used it once. Then 'stored' it. Now I can't find it. Figures!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

12-14-2010, 02:42 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Special tool for ignition bezel?? not a bad price

12-14-2010, 03:34 PM	#5
1950ChevySuburban Registered User Join Date: Feb 2010 Location: Tucson, AZ Posts: 32	Re: Special tool for ignition bezel?? Good deal! Got it, in the mail now. Thanks for the fast help! John

12-14-2010, 05:08 PM	#6
RED67 Forever Grateful Join Date: Mar 2001 Location: Forney,Texas Posts: 779	Re: Special tool for ignition bezel?? just bought one......I was having hell trying to get that off __________________ R.I.P Dad 04-07-42 - 05-27-09

12-14-2010, 05:29 PM	#7
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Special tool for ignition bezel?? Huh, I got by with a screwdriver and hammer.. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

12-14-2010, 06:24 PM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Special tool for ignition bezel?? When I take them off I use Needle-Nose Pliers . I thought that was the speacial tool you were looking for! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 12-14-2010 at 06:25 PM.

12-14-2010, 10:08 PM	#9
70chevytruck Registered User Join Date: Jun 2007 Location: Buda, Texas Posts: 865	Re: Special tool for ignition bezel?? Me too...needle nose plyers and three hands..... __________________ 70chevytruck

12-14-2010, 10:19 PM	#10
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: Special tool for ignition bezel?? according to the ebay listing for that tool, "Show gudges notice". May have to invest in one of those, but a screwdriver and hammer have never let me down. __________________ Bill BEATERS ARE NEATER

12-14-2010, 10:21 PM	#11
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Special tool for ignition bezel?? Thanks for the link ls1nova71. I purchased one. I have fought a few of these, no longer. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-14-2010, 10:27 PM	#12
cerjio Registered User Join Date: Dec 2008 Location: coffeyville, Kansas Posts: 195	Re: Special tool for ignition bezel?? now that i seen what one looks like I think I can make my own

12-14-2010, 10:37 PM	#13
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Special tool for ignition bezel?? Personally, for $20 I've got way to many other things to do. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-15-2010, 02:01 AM	#14
Spoof Registered User Join Date: Jul 2000 Location: Victoria,BC, Canada Posts: 1,300	Re: Special tool for ignition bezel?? Yeah the PO of my truck used a hammer and screwdriver too. I ordered a new bezel and an ign. bezel tool along with a gauge bezel tool. __________________ 71 GMC 1500 LWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.