Project Lemon Drop: anything but stock!

[Rokcrln]

Before you pull the trans lets talk and I will come up and give you a hand and pull the front sheet metal off so you don't scratch that cab bottom. Get a hold of me after the 1st of the year and I will bring your X-mass gift to you in the form of 2 hands (for truck use only!) for the day!

Kevin
LFD Inc.

[jugernot]

Originally Posted by Rokcrln

Before you pull the trans lets talk and I will come up and give you a hand and pull the front sheet metal off so you don't scratch that cab bottom. Get a hold of me after the 1st of the year and I will bring your X-mass gift to you in the form of 2 hands (for truck use only!) for the day!

Kevin
LFD Inc.

Will do, sounds good. Thanks

[jugernot]

Finally we made some progress. Kevin came by today and we pull off the dog house, removed the th350 transmission. Which I must say I'm glad we did because Kevin noticed that the flex plate was bent. We replace the flex plate and then install the new 700r4. There is an issue with the Early Classic transmission cross member doesn't quite meet up with the transmission mount.

While the fenders were off Kevin sorted out the AC and Heater hose issue at the bulk head fitting. We then put the dog house back on. Kevin re-aligned the front sheet metal and installed the inner fender wells.

We got a lot done in about 9 hours.