Updated truck pics, future plans! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djw32 · 12-20-2010, 02:19 PM

Quote:

Originally Posted by 72BlckButy

My truck is running on a 4.5/6" static drop with 20x8.5 (f) and 20x10 (r). So a 4" drop is possible.

Is a 255 up front all the tire you can fit? Do the tires rub if you are at full lock side to side?

I would love to run a 275 up front with a 4" drop.

72BlckButy · 12-20-2010, 03:52 PM

No rubbing at all, or they wouldn't be on my truck.

For me a 255 is all the taller I would run IMO, plus they the tire pattern had to match for me. It all comes down to the BS of the wheels.

68Stepbed · 12-20-2010, 06:49 PM

Truck looks super nice now! I can understand wanting to update to larger wheels. I personally don't like wheels bigger than 18's, but if that's what you want, go for it.

BTW, I used to live in Jonesboro, for about 2 years. We still have some friends there. We're hoping to make it out there this spring sometime and visit. I'd also like to take my truck to George Ray's if I get to take it.

VA72C10 · 12-20-2010, 06:59 PM

very nice! Looks great now. Will look even better a little lower with new rims/rubber...

RCbowtie69 · 12-20-2010, 07:34 PM

U got something to work with there, nice truck!!! ,keep on truckin''

19seventeeCustom · 12-21-2010, 12:10 AM

68stepbed, thanks alot, and georges sounds awesome. nothin better than having a few cold ones watching the races!!

va72c10, thanks, i can't wait!!!

RCbowtie69, I couldn't be happier with the truck i started with!

DUTCHMAN · 12-21-2010, 02:55 PM

Sweet truck.

Just ordered the same steeringwheel

19seventeeCustom · 12-21-2010, 03:03 PM

Hey guys, Just got my fabric samples from SMS fabrics. Could not be happier with the orange plaid.

The truck seat is getting recovered in the Highlander Orange Plaid w/ white vinyl.

Does anybody know off hand how many yards of vinyl is needed to cover a bench seat. I know they say you need 1 1/4 yards of plaid material but havnt found anything about the vinyl portion.

72BlckButy · 12-21-2010, 03:30 PM

You might check with n2billet... I know that he recently (within the year) order fabric from SMS and had a cover made for his bench.

TheSeeker · 12-21-2010, 03:31 PM

Where Did you get that Steering wheel? I want one just like that for my truck, its nice!

19seventeeCustom · 12-21-2010, 03:36 PM

72blkbuty-thanks I see what I can figure out

TheSeeker-the wheels was in the truck when I bough It, But i've seen it in LMC before, not sure where the cheapest place to buy it would be.

**Dieselwrencher** · 12-21-2010, 05:17 PM

Very nice truck! I agree it looks great now, but also know it will look sweet after it is lowered and you add some bigger shoes.

DUTCHMAN · 12-21-2010, 06:04 PM

Quote:

Originally Posted by TheSeeker

Where Did you get that Steering wheel? I want one just like that for my truck, its nice!

Got my from Summit

71sierragrande · 12-23-2010, 03:12 AM

That truck looks done to me. I also like the chubby rubber better. Itll look great whatever you do.

19seventeeCustom · 12-23-2010, 10:59 AM

Thanks for the positive responses guys!!!

12-20-2010, 03:52 PM	#27
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Updated truck pics, future plans! No rubbing at all, or they wouldn't be on my truck. For me a 255 is all the taller I would run IMO, plus they the tire pattern had to match for me. It all comes down to the BS of the wheels. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-20-2010, 06:49 PM	#28
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Updated truck pics, future plans! Truck looks super nice now! I can understand wanting to update to larger wheels. I personally don't like wheels bigger than 18's, but if that's what you want, go for it. BTW, I used to live in Jonesboro, for about 2 years. We still have some friends there. We're hoping to make it out there this spring sometime and visit. I'd also like to take my truck to George Ray's if I get to take it. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

12-20-2010, 06:59 PM	#29
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Updated truck pics, future plans! very nice! Looks great now. Will look even better a little lower with new rims/rubber... __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-20-2010, 07:34 PM	#30
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: Updated truck pics, future plans! U got something to work with there, nice truck!!! ,keep on truckin''

12-21-2010, 12:10 AM	#31
19seventeeCustom Registered User Join Date: Mar 2010 Location: Downtown Posts: 573	Re: Updated truck pics, future plans! 68stepbed, thanks alot, and georges sounds awesome. nothin better than having a few cold ones watching the races!! va72c10, thanks, i can't wait!!! RCbowtie69, I couldn't be happier with the truck i started with!

12-21-2010, 02:55 PM	#32
DUTCHMAN Registered User Join Date: Dec 1999 Location: the Netherlands Posts: 363	Re: Updated truck pics, future plans! Sweet truck. Just ordered the same steeringwheel __________________ 06 BMW 330d aut touring full option 83 Jeep CJ7 360 aut sold 71 GMC Suburban 67 Chevrolet C10 stepside 54 Ford F100 sold 49 Chevrolet coe 48 Ford f6 coe Strijen the Netherlands "NO MISTAKES NO PROGRESS"

12-21-2010, 03:03 PM	#33
19seventeeCustom Registered User Join Date: Mar 2010 Location: Downtown Posts: 573	Re: Updated truck pics, future plans! Hey guys, Just got my fabric samples from SMS fabrics. Could not be happier with the orange plaid. The truck seat is getting recovered in the Highlander Orange Plaid w/ white vinyl. Does anybody know off hand how many yards of vinyl is needed to cover a bench seat. I know they say you need 1 1/4 yards of plaid material but havnt found anything about the vinyl portion.

12-21-2010, 03:30 PM	#34
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Updated truck pics, future plans! You might check with n2billet... I know that he recently (within the year) order fabric from SMS and had a cover made for his bench. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-21-2010, 03:31 PM	#35
TheSeeker Registered User Join Date: Dec 2009 Location: Glendale, AZ Posts: 337	Re: Updated truck pics, future plans! Where Did you get that Steering wheel? I want one just like that for my truck, its nice!

12-21-2010, 03:36 PM	#36
19seventeeCustom Registered User Join Date: Mar 2010 Location: Downtown Posts: 573	Re: Updated truck pics, future plans! 72blkbuty-thanks I see what I can figure out TheSeeker-the wheels was in the truck when I bough It, But i've seen it in LMC before, not sure where the cheapest place to buy it would be.

12-21-2010, 05:17 PM	#37
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Updated truck pics, future plans! Very nice truck! I agree it looks great now, but also know it will look sweet after it is lowered and you add some bigger shoes. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-23-2010, 03:12 AM	#39
71sierragrande Petroleum User Join Date: Dec 2010 Location: San Diego, California Posts: 928	Re: Updated truck pics, future plans! That truck looks done to me. I also like the chubby rubber better. Itll look great whatever you do.

12-23-2010, 10:59 AM	#40
19seventeeCustom Registered User Join Date: Mar 2010 Location: Downtown Posts: 573	Re: Updated truck pics, future plans! Thanks for the positive responses guys!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.