faster then i was thinking.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

3r!c84 · 12-23-2010, 10:15 PM

finally too out the truck with a bunch of friends for the first time after the new motor. and upgrades

fastest time out was a 17.00 with my 305/th350 (old setup)

(new set up)
fastest time out was a 14.01 -- couldnt break 13.99 had no helmet. so didnt mess with timming. but it had a bunch left in it.

yes along with the dinggle balls

3r!c84 · 12-23-2010, 10:20 PM

few crappy shots.

evan · 12-23-2010, 10:20 PM

That's a respectable time. What are the motor specs?

3r!c84 · 12-23-2010, 10:24 PM

neighbors pinto wagon. built race car. was a 9 sec car. blew the motor 10 years ago, he put a stock 302 out of a 80s mustang. everything else is full race.
he left me at the line (transbrake) but i pulled him in on the big end

muthstryker · 12-23-2010, 10:39 PM

Right on man, thats cool!

bitchin85 · 12-23-2010, 10:41 PM

NICE bro. i have to get my truck back to the track. i ran with a stock 355 with 305 heads on it and ran a 16.7... i am waiting till spring so i can run it again with the vortec heads and cam and what not. i doubt to see 14s tho. lol but seriously ur truck is awesome. im jelous. it has come a LONG way

KQQL IT · 12-23-2010, 10:42 PM

SBC 400's

3r!c84 · 12-23-2010, 10:45 PM

Quote:

Originally Posted by KQQL IT

SBC 400's

first run out. raced this guy with a 90s 1500 truck. built 355. alum heads. fully built eveything. i was ready for a as$ wooping. we where dead even till he blew a head gasket going threw the traps

400

*nbpro* · 12-23-2010, 11:16 PM

Quote:

Originally Posted by evan

That's a respectable time. What are the motor specs?

His specs newly rebulit 400 small block. two eyebrow flat top pistons standerd bore 9:5to1compression . elgin cam split lift .503 .510 and split duration. all new speed pro bearings, fresh heads with bigger valves, 1:6roller rockers. edelbrock eps intake. holley 750 carb

http://67-72chevytrucks.com/vboard/s...&postcount=352

3r!c84 · 12-23-2010, 11:21 PM

thanks bro.

*nbpro* · 12-23-2010, 11:40 PM

if you'll look on your build thread, as I told you, put it in your sig. then we get back to that helmet thing. hardhead, no helmet. oh, just hardheaded period lol.

mikewayne · 12-24-2010, 12:42 AM

Oldies with great muscles... that is what I have to say... really a little bit of modification can make this rides like a monster!!!

3r!c84 · 12-24-2010, 02:33 PM

Quote:

Originally Posted by mikewayne

Oldies with great muscles... that is what I have to say... really a little bit of modification can make this rides like a monster!!!

thanks thats more then a little modification tho

fightermatt · 12-24-2010, 02:42 PM

great looking truck man, the engine bay looks nice and neat I hope to get mine there someday.

79gmcclassic · 12-24-2010, 03:24 PM

thats awesome!

3r!c84 · 12-24-2010, 04:11 PM

Quote:

Originally Posted by fightermatt

great looking truck man, the engine bay looks nice and neat I hope to get mine there someday.

check the built thread there is more pics of the build.. link in my sigg

Quote:

Originally Posted by 79gmcclassic

thats awesome!

thank you sir

80chevyshortbox · 12-24-2010, 04:53 PM

what do you have for a rear end? is it a 3:73?

GmtGmt · 12-24-2010, 05:00 PM

Nice and good times also

btw love the pinto wagon

Pop's C-10 · 12-24-2010, 05:00 PM

Good number

3r!c84 · 12-24-2010, 05:11 PM

Quote:

Originally Posted by 80chevyshortbox

what do you have for a rear end? is it a 3:73?

10bolt.
3:42
auburn posi

3r!c84 · 12-24-2010, 05:15 PM

Quote:

Originally Posted by GmtGmt

Nice and good times also

btw love the pinto wagon

so do i. back halfed, full alum inside. full cage. ford 9icn with 4 link coil overs

somthing different

sandnuriz · 12-24-2010, 05:21 PM

Thats great

80chevyshortbox · 12-24-2010, 05:36 PM

thanks. looks good btw

draggin86 · 12-24-2010, 06:49 PM

Wow dude! that is bad ass. it must feel great to see those times drop so much after all the hard work!

3r!c84 · 12-24-2010, 07:06 PM

Quote:

Originally Posted by draggin86

Wow dude! that is bad ass. it must feel great to see those times drop so much after all the hard work!

yea it feels great. going out again mess with the timming and jetting. see if i can get into the high 13's

the 2and1/4 exhaust piping is realy choking it up it feels. going to 3inch and better mufflers when money allows

12-23-2010, 10:15 PM	#1
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	faster then i was thinking.. finally too out the truck with a bunch of friends for the first time after the new motor. and upgrades fastest time out was a 17.00 with my 305/th350 (old setup) (new set up) fastest time out was a 14.01 -- couldnt break 13.99 had no helmet. so didnt mess with timming. but it had a bunch left in it. yes along with the dinggle balls __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90 Last edited by 3r!c84; 12-23-2010 at 10:15 PM.

12-23-2010, 10:20 PM	#2
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: faster then i was thinking.. few crappy shots. Attached Images __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

12-23-2010, 10:20 PM	#3
evan Registered User Join Date: Jul 2005 Location: SK, Canada Posts: 488	Re: faster then i was thinking.. That's a respectable time. What are the motor specs? __________________ Evan B.

12-23-2010, 10:24 PM	#4
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: faster then i was thinking.. neighbors pinto wagon. built race car. was a 9 sec car. blew the motor 10 years ago, he put a stock 302 out of a 80s mustang. everything else is full race. he left me at the line (transbrake) but i pulled him in on the big end Attached Images __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

12-23-2010, 10:39 PM	#5
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: faster then i was thinking.. Right on man, thats cool!

12-23-2010, 10:41 PM	#6
bitchin85 Registered User Join Date: Aug 2009 Location: Lambertville MI Posts: 962	Re: faster then i was thinking.. NICE bro. i have to get my truck back to the track. i ran with a stock 355 with 305 heads on it and ran a 16.7... i am waiting till spring so i can run it again with the vortec heads and cam and what not. i doubt to see 14s tho. lol but seriously ur truck is awesome. im jelous. it has come a LONG way __________________ "I'll keep my guns, money, and freedom. You can keep the "change"

12-23-2010, 10:42 PM	#7
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,447	Re: faster then i was thinking.. SBC 400's

12-23-2010, 11:21 PM	#10
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: faster then i was thinking.. thanks bro. __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

12-23-2010, 11:40 PM	#11
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: faster then i was thinking.. if you'll look on your build thread, as I told you, put it in your sig. then we get back to that helmet thing. hardhead, no helmet. oh, just hardheaded period lol.

12-24-2010, 12:42 AM	#12
mikewayne Registered User Join Date: Dec 2010 Location: Newyork, Newyork Posts: 29	Re: faster then i was thinking.. Oldies with great muscles... that is what I have to say... really a little bit of modification can make this rides like a monster!!!

12-24-2010, 02:42 PM	#14
fightermatt Registered User Join Date: Dec 2010 Location: Augusta Posts: 13	Re: faster then i was thinking.. great looking truck man, the engine bay looks nice and neat I hope to get mine there someday.

12-24-2010, 03:24 PM	#15
79gmcclassic Registered User Join Date: Jun 2010 Location: Green bay, Wisconsin Posts: 593	Re: faster then i was thinking.. thats awesome! __________________ 1979 GMC Sierra Classic Freshly lowered 5 inches

12-24-2010, 04:53 PM	#17
80chevyshortbox Registered User Join Date: Jun 2009 Location: lethbridge Posts: 269	Re: faster then i was thinking.. what do you have for a rear end? is it a 3:73?

12-24-2010, 05:00 PM	#19
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: faster then i was thinking.. Good number

12-24-2010, 05:21 PM	#22
sandnuriz Registered User Join Date: Sep 2010 Location: Bakersfield,Ca. Posts: 340	Re: faster then i was thinking.. Thats great __________________ 57 Chevy shortbed,327,Muncie 4 speed,12 Bolt rear end(current project) It's your ride build it the way you want !!!!!!!!!!



Register or Log In To remove these advertisements.

12-24-2010, 05:36 PM	#23
80chevyshortbox Registered User Join Date: Jun 2009 Location: lethbridge Posts: 269	Re: faster then i was thinking.. thanks. looks good btw

12-24-2010, 06:49 PM	#24
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: faster then i was thinking.. Wow dude! that is bad ass. it must feel great to see those times drop so much after all the hard work! __________________ My build thread. Boy what did i get myself into!

Register or Log In To remove these advertisements.