|
11-17-2010, 10:28 PM
|
#1 |
|
Registered User
Join Date: Nov 2009
Location: Antigonish Nova Scotia
Posts: 213
|
1986 gmc 1500 4x4
Good Day Guys!
I finally Purchased my First Square Body!  Being that im only 17 it definatley wont be my last! theyve always been my favorite truck.-3 Speed Bull Low -Tired worn out 305 (tbi) -4x4 -Brand New front bumper/rear and front Grill -Brand New leather bench seat Its in my shop class now being torn apart for a frame off resto..I started by cutting all my bed bolts, Im going to sand the frame down and repaint it black, new brakes and shocks. Start my way at the back to the front, first question is, should i keep it throttle body? I want to do a 350 swap but what years will work for me without much mods? |
|
|
|
11-22-2010, 12:12 AM
|
#2 |
|
Registered User
Join Date: Nov 2009
Location: Antigonish Nova Scotia
Posts: 213
|
Re: 1986 gmc 1500 4x4
I want to know if I buy a early 90s Tbi 350 if it will go directly into my truck? can anyone let me know if this swap has been one?
|
|
|
|
|
11-22-2010, 09:18 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: Fairbanks, AK
Posts: 1,830
|
Re: 1986 gmc 1500 4x4
Welcome to the board. Are you sure it has TBI? If it does could it be an 87? There are some differences between the tbi and carb motors, but the swap has been done and there are some very good threads on hear that you can search for most answers concerning the swap. If it is a TBI motor, you can put a 350 in by using the throttle body and computer out of the 350. I think they are pretty much the same otherwise. Good luck.
__________________
-Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck |
|
|
|
|
11-23-2010, 12:01 AM
|
#4 |
|
Registered User
Join Date: Nov 2009
Location: Antigonish Nova Scotia
Posts: 213
|
Re: 1986 gmc 1500 4x4
Well ill pick apart the vin number and see what I really have! It is a throttle body when I took the manifold cover off! Id like to stick with the tbi as I already hve it and its fairly easy to gain power out of them atleast so ive heard! Im going to try my hardest at getting pictures! my digiatal cameras effed!
|
|
|
|
|
12-26-2010, 12:44 AM
|
#5 |
|
Registered User
Join Date: Nov 2009
Location: Antigonish Nova Scotia
Posts: 213
|
Re: 1986 gmc 1500 4x4
heres the pictures as I promised! it is in fact an 87, plans are stripping it down(already did) and sandblasting my frame and replacing all the used and tired running gear. Paint the frame all nice, repaint the body hugger orange. Plans are to drop a 427 tall deck into it. i only paid 600 for it, theirs over 600 in bumpers and grills on it
 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
