The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-24-2010, 01:48 PM   #1
superdirt
Registered User
 
Join Date: Aug 2008
Location: nc
Posts: 1
Question 47-54 chevy truck doors/hinge/cab dents.

My 53 had a huge dent in the left side cab from the door opening too far. I've looked at other for sale trucks of the same generation & about half of them have the same damage. Why was this so common? What steps can I take now to not do the same damage? Was the right side doors damaged as often? I'm at a loss fellas, any advice will help. Thanks
__________________
Thank you,
CP @ T-Town Fabrication
superdirt is offline   Reply With Quote
Old 12-24-2010, 02:36 PM   #2
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: 47-54 chevy truck doors/hinge/cab dents.

Shoot us some pictures! My 53 doesn't have any dents from door,just RUST if it's where I think it is it could be fixed with a patch panel. The dent is caused by bad door stops- easy fix

Last edited by Indian113; 12-24-2010 at 02:37 PM.
Indian113 is offline   Reply With Quote
Old 12-24-2010, 02:50 PM   #3
sweet70beast
Registered User
 
sweet70beast's Avatar
 
Join Date: Sep 2006
Location: Shelley Idaho
Posts: 876
Re: 47-54 chevy truck doors/hinge/cab dents.

Are you talking right in front of the door?
If so they are called whiskey dents and they are from the door being opened to far, maybe a gust of wind grabbed the door. My trucks don't have them but I have seen many that have.
__________________
1970 Nova 327/T5 (my 1st car)
1971 K-20 350/350/205 (winter DD)
1953 GMC Suburban
1968 Chevy Bel Air
1976 Chev C-10
1972 Skylark (suncoupe)
1 of 3943 made
sweet70beast is offline   Reply With Quote
Old 12-25-2010, 03:51 AM   #4
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,720
Re: 47-54 chevy truck doors/hinge/cab dents.

It also comes from backing into a post with the door open when backing up. Or a hard stop while going forward with the door open. Of the four cabs I have out here one has that dent and it came off a one and a half ton farm truck that hauled a fuel tank for the last part of it's working live fueling up equipment in the wheat fields.

You have to remember too that unlike a lot of today's trucks these old trucks were purchased to work and work hard and a lot of them had pretty hard lives along the way. And without ac a lot of guys drove through the fields in the summer with the drivers door propped open to let the air flow a bit better.
mr48chev is offline   Reply With Quote
Old 12-25-2010, 06:44 AM   #5
S10Fan
Old Heap Driver
 
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,642
Re: 47-54 chevy truck doors/hinge/cab dents.

Mine doesn't have those dents, just rust. LOL.
__________________
_____________________________
Bryan

'99 Silverado 1500, 4.3, 5-speed, reg cab, short bed
'50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser.
'40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.
S10Fan is offline   Reply With Quote
Old 12-26-2010, 12:47 AM   #6
52 Rat
Registered User
 
52 Rat's Avatar
 
Join Date: Aug 2010
Location: Asheville, NC
Posts: 291
Re: 47-54 chevy truck doors/hinge/cab dents.

Quote:
Originally Posted by superdirt View Post
My 53 had a huge dent in the left side cab from the door opening too far. I've looked at other for sale trucks of the same generation & about half of them have the same damage. Why was this so common? What steps can I take now to not do the same damage? Was the right side doors damaged as often? I'm at a loss fellas, any advice will help. Thanks
This seems to be common. My truck had the dents on both sides. I replaced the panels.
__________________
My build project http://67-72chevytrucks.com/vboard/s...=1#post4158671
52 Rat is offline   Reply With Quote
Old 12-26-2010, 11:25 AM   #7
slicks garage
Registered User
 
Join Date: Aug 2008
Location: Phoenix, AZ
Posts: 56
Re: 47-54 chevy truck doors/hinge/cab dents.

My project doesn't have those dents. It was outfitted with bondo; filling it up...... LOL : )
slicks garage is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com