Any of you running a harness bar in your trucks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

383Ram · 12-28-2010, 09:48 PM

You are correct, you can't mount them to the floor and have them work properly, the shoulder harness needs to be just below the top of your shoulders.

I did not mean to down your post with my opinion, I just wanted you to consider what i considered aggrivation of buckleing all five sections into the latch everytime I got into the car. Yes, they certianly have a look, but it is so much easier with one click of the buckle on a stock type 3 point setup.

Do they make a bar to bolt into these trucks for the harnesses? Just wasn't aware of anything like that.

12-28-2010, 09:48 PM	#1
383Ram Registered User Join Date: Apr 2009 Location: Truckville, The Capital of NY Posts: 217	Re: Any of you running a harness bar in your trucks? You are correct, you can't mount them to the floor and have them work properly, the shoulder harness needs to be just below the top of your shoulders. I did not mean to down your post with my opinion, I just wanted you to consider what i considered aggrivation of buckleing all five sections into the latch everytime I got into the car. Yes, they certianly have a look, but it is so much easier with one click of the buckle on a stock type 3 point setup. Do they make a bar to bolt into these trucks for the harnesses? Just wasn't aware of anything like that. __________________ . 454/4 speed, '85 Dodge Ram hybrid build in progress 454, PP heads, Dual 500 CFM cabs, 'Vette manifolds. First time out---spinning for half track Slooowww build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=348050 Engine build thread at: http://www.chevelles.com/forums/showthread.php?t=326289 Last edited by 383Ram; 12-28-2010 at 09:49 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.