OR Parting out 1970 GMC C10 350,TH350, 3.73 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 01-01-2011, 04:30 AM

Yes it is. I pulled the cover today and it looks great inside. The ratio is 3.73 non locking. I can make this 5 lug should someone want it for a 71 or 72. I'm going to the Canby swap meet in two weeks if it helps.

gsd66nova · 01-01-2011, 06:19 PM

Hello, does it have the fatory steering wheel? If it does what kind of shape is it in and how much? Thanks, Shane.

**tll74** · 01-02-2011, 12:33 AM

Quote:

Originally Posted by gsd66nova

Hello, does it have the fatory steering wheel? If it does what kind of shape is it in and how much? Thanks, Shane.

It does but it is JUNK. sorry

**tll74** · 01-02-2011, 01:03 AM

More pics

speaker free with radio no good.
arm rest one very nice 15.00 SOLD
other minor split in vinal 5.00
original owners manual minor tear 15.00
glove box liner good condition 7.50
inner heater housing very nice condition 35.00
ash tray been used 10.00
TH350 kick down cable 12.50
TH350 vac.mod line 7.50 SOLD
dome lens housing (chrome bad) with wiring 7.50
speedo cable with housing 12.50
e-brake cable from cab to rear loop 12.50
e-brake cable rear loop with three supports and couplers 15.00
horns pair 15.00 SOLD
hood latch 10.00
wiper arms 10.00 each or 17.50 pair
w/s wash res. with bracket 10.00
fuel line from pump to carb minor twist 7.5 SOLD
wiper motor 20.00
e-brake ratchet assy 20.00
brake pedal and hanger bracket assy 20.00
center grill support 7.50
original rear shocks 40.00
w/s washer hoses all three 7.50
original rad over flow hose 5.00
gas pedal complete with linkage 15.00
one sill plate decent driver 7.50
front markers 5.00 each 7.50 pair
reciever hitch 60.00
edlebrock valve covers (they look better than the pic shows)30.00
oil pressure hard line complete 7.50 SOLD
inside rear view mirror typical cond. better than most 10.00 SOLD
GMC 1500 emblems 7.50 ea. or 12.50 pair
intermeadiate steering shaft 12.00
wiper switch with nut and knob 7.50
headlamp switch with nut and knob 7.50 SOLD
cig lighter 9.00 SOLD
heater controls - bright and solid, upper level broke ***moved to it own thread***
headlamps with buckets and rings 7.50 ea. 25.00 all four
steering column support bracket and clamp 5.00 SOLD

mgkgmc · 01-02-2011, 01:16 AM

What color is that for the interior? Can you get a pic of the spid. If is gold I'm interested in it all not looking for parchment though.

Davedr · 01-02-2011, 01:18 AM

Are the vent windows for sale? Can i get pics of them also? Interested in the Booster,vent windows, and horn.

**tll74** · 01-02-2011, 01:20 AM

More pics of misc

P/B booster pics for Davedr.

heat sheild, and LH exhaust pics for crig39. I have a RH manifold still on a truck no time today to get off.

**tll74** · 01-02-2011, 01:34 AM

More pics

Rear end pics for denny5625 and butternut1972.

c1069 · 01-02-2011, 01:44 AM

Whats color are the belts, arm rest and sun-visors Thanks.

**tll74** · 01-02-2011, 01:45 AM

more pics

The LH eyebrow has dent and is not rusted on the outside.

pic of the P/S change over.

Under dash harness is in perfect condition. The lettering on box is excellent.

LH manifold pic for crig39

**tll74** · 01-02-2011, 02:02 AM

bumper pics for jmedero. This bumper is a bit ruffer that originaly thought.

**tll74** · 01-02-2011, 02:10 AM

Quote:

Originally Posted by c1069

Whats color are the belts, arm rest and sun-visors Thanks.

They are a light tan or beige. The spid shows the interior color is gold.

fastfinishes · 01-02-2011, 02:18 AM

interested in the tailgate and the whole grill inner outer bezels everything shipped to 27288

**tll74** · 01-02-2011, 02:24 AM

Quote:

Originally Posted by Davedr

Are the vent windows for sale? Can i get pics of them also? Interested in the Booster,vent windows, and horn.

Yes, the vent glass assemblies are for sale arn't they on the first list? They are very nice, they are chrome with clear glass. I was looking at them earlier and thinking I should hang on to them but I need the $$. Pics would be Monday. I spent the whole day at the shop and plan to stay home tomorrow and rest.

c1069 · 01-02-2011, 02:24 AM

Quote:

Originally Posted by tll74

They are a light tan or beige. I think it's called parchment.

or off white, can I have better pictures to frrivera@earthlink.net. Thanks

**tll74** · 01-02-2011, 02:40 AM

Quote:

Originally Posted by fastfinishes

interested in the tailgate and the whole grill inner outer bezels everything shipped to 27288

The grill with the upper portion is a nice driver quality it has a couple dings. I some how missed it today while taking pics. The HL bezels are NICE. The RH eyebrow is no good and the LH has nice chrome but a ding down low. I just posted a pic of the LH eyebrow. The gate doesn't have any bow but does have many dings on the inside. The outside only has two minor dents. I might go to the shop tomorrow and take some pics if I have enough request. Thanks, Tom

roger0080 · 01-02-2011, 03:16 AM

How much for the rear view mirror?
How much for the metal fuel line from the pump to the carb? Did you clean that up or something? looks like it's chromed or something.
Thanks.

Oops I see you have it all priced in the 2nd price listing I missed.

mgkgmc · 01-02-2011, 07:59 AM

Im sorry but I asked first on the interior including the visors. I am still interested if you could check the spid tan will work fo me.

butternut1972 · 01-02-2011, 01:20 PM

Pm sent.

jmedero · 01-02-2011, 01:34 PM

What's the best you can do on the bumper?
Thanks for te pics.
Posted via Mobile Device

**tll74** · 01-02-2011, 02:35 PM

Quote:

Originally Posted by jmedero

What's the best you can do on the bumper?
Thanks for te pics.
Posted via Mobile Device

30.00 plus, with a little TLC it would be a pretty decent driver.

**tll74** · 01-02-2011, 02:39 PM

Quote:

Originally Posted by roger0080

How much for the rear view mirror?
How much for the metal fuel line from the pump to the carb? Did you clean that up or something? looks like it's chromed or something.
Thanks.

Oops I see you have it all priced in the 2nd price listing I missed.

just a quicky clean up in the solvent tank with a wore out piece of scotchbright. thanks

*sharpie1972* · 01-02-2011, 02:49 PM

I'll take the TH350 kickdown cable and wiring harness with fuse box if they aren't spoken for. Thanks, Sharpie

**tll74** · 01-02-2011, 03:16 PM

Quote:

Originally Posted by sharpie1972

I'll take the TH350 kickdown cable and wiring harness with fuse box if they aren't spoken for. Thanks, Sharpie

In a PM butternut72 has expressed interest in the dash wiring, but no committment to buy. Not sure exactly how this is viewed as to the board rules. I already got in the dog house in the beginning of this thread so I would like to remain on good behavior

He did ask first but not in thread. If any knows please advise.

*sharpie1972* · 01-02-2011, 03:26 PM

Technically he should ask in thread, but let's give him a shot if he needs it. I was just looking for a backup. Thanks, Sharpie

01-01-2011, 04:30 AM	#51
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Yes it is. I pulled the cover today and it looks great inside. The ratio is 3.73 non locking. I can make this 5 lug should someone want it for a 71 or 72. I'm going to the Canby swap meet in two weeks if it helps. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-01-2011, 06:19 PM	#52
gsd66nova Registered User Join Date: Dec 2010 Location: Milton TN. Posts: 108	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Hello, does it have the fatory steering wheel? If it does what kind of shape is it in and how much? Thanks, Shane.

01-02-2011, 01:03 AM	#54
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 More pics speaker free with radio no good. arm rest one very nice 15.00 SOLD other minor split in vinal 5.00 original owners manual minor tear 15.00 glove box liner good condition 7.50 inner heater housing very nice condition 35.00 ash tray been used 10.00 TH350 kick down cable 12.50 TH350 vac.mod line 7.50 SOLD dome lens housing (chrome bad) with wiring 7.50 speedo cable with housing 12.50 e-brake cable from cab to rear loop 12.50 e-brake cable rear loop with three supports and couplers 15.00 horns pair 15.00 SOLD hood latch 10.00 wiper arms 10.00 each or 17.50 pair w/s wash res. with bracket 10.00 fuel line from pump to carb minor twist 7.5 SOLD wiper motor 20.00 e-brake ratchet assy 20.00 brake pedal and hanger bracket assy 20.00 center grill support 7.50 original rear shocks 40.00 w/s washer hoses all three 7.50 original rad over flow hose 5.00 gas pedal complete with linkage 15.00 one sill plate decent driver 7.50 front markers 5.00 each 7.50 pair reciever hitch 60.00 edlebrock valve covers (they look better than the pic shows)30.00 oil pressure hard line complete 7.50 SOLD inside rear view mirror typical cond. better than most 10.00 SOLD GMC 1500 emblems 7.50 ea. or 12.50 pair intermeadiate steering shaft 12.00 wiper switch with nut and knob 7.50 headlamp switch with nut and knob 7.50 SOLD cig lighter 9.00 SOLD heater controls - bright and solid, upper level broke *moved to it own thread* headlamps with buckets and rings 7.50 ea. 25.00 all four steering column support bracket and clamp 5.00 SOLD Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 01-08-2011 at 01:07 AM. Reason: add parts list and prices

01-02-2011, 01:16 AM	#55
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,355	Re: Parting out 1970 GMC C10 350,TH350, 3.73 What color is that for the interior? Can you get a pic of the spid. If is gold I'm interested in it all not looking for parchment though.

01-02-2011, 01:18 AM	#56
Davedr Registered User Join Date: Sep 2010 Location: Dallas,Tx Posts: 202	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Are the vent windows for sale? Can i get pics of them also? Interested in the Booster,vent windows, and horn.

01-02-2011, 01:20 AM	#57
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 More pics of misc P/B booster pics for Davedr. heat sheild, and LH exhaust pics for crig39. I have a RH manifold still on a truck no time today to get off. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-02-2011, 01:34 AM	#58
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 More pics Rear end pics for denny5625 and butternut1972. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-02-2011, 01:44 AM	#59
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Whats color are the belts, arm rest and sun-visors Thanks. __________________ Pancho 69 c/10 step side 454/400 with 3.07

01-02-2011, 01:45 AM	#60
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 more pics The LH eyebrow has dent and is not rusted on the outside. pic of the P/S change over. Under dash harness is in perfect condition. The lettering on box is excellent. LH manifold pic for crig39 Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 01-02-2011 at 01:49 AM.

01-02-2011, 02:02 AM	#61
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 bumper pics for jmedero. This bumper is a bit ruffer that originaly thought. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-02-2011, 02:18 AM	#63
fastfinishes Registered User Join Date: Nov 2010 Location: virginia Posts: 3	Re: Parting out 1970 GMC C10 350,TH350, 3.73 interested in the tailgate and the whole grill inner outer bezels everything shipped to 27288 __________________ Jeff Holley Owner of Fast Finishes Powder Coating & performance... Specializing In Turbo C10s,mustangs,camaro's, pretty much anything you wanna make fast, powder coating and ceramic coating, from mild to wild... Fast-Finishes Powder Coating & Performance 276-340-9054 407 cascade ave. eden,nc 27288

01-02-2011, 03:16 AM	#67
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 627	Re: Parting out 1970 GMC C10 350,TH350, 3.73 How much for the rear view mirror? How much for the metal fuel line from the pump to the carb? Did you clean that up or something? looks like it's chromed or something. Thanks. Oops I see you have it all priced in the 2nd price listing I missed. __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71... Last edited by roger0080; 01-02-2011 at 01:23 PM. Reason: Blind I was

01-02-2011, 07:59 AM	#68
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,355	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Im sorry but I asked first on the interior including the visors. I am still interested if you could check the spid tan will work fo me.

01-02-2011, 01:20 PM	#69
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Pm sent.

01-02-2011, 01:34 PM	#70
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Parting out 1970 GMC C10 350,TH350, 3.73 What's the best you can do on the bumper? Thanks for te pics. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084



Register or Log In To remove these advertisements.

01-02-2011, 02:49 PM	#73
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting out 1970 GMC C10 350,TH350, 3.73 I'll take the TH350 kickdown cable and wiring harness with fuse box if they aren't spoken for. Thanks, Sharpie Last edited by sharpie1972; 01-02-2011 at 02:51 PM.

01-02-2011, 03:26 PM	#75
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Technically he should ask in thread, but let's give him a shot if he needs it. I was just looking for a backup. Thanks, Sharpie

Register or Log In To remove these advertisements.