|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-02-2011, 07:58 PM
|
#1 |
|
Registered User
Join Date: Oct 2009
Location: san diego, ca
Posts: 14
|
Brake bleeding trouble
alright what am i doing wrong? Removed calipers(drained) on front to replace front suspension and spindles. Put all back together and now can't get air out. I have probably pumped 12 oz per side through still air in lines. the mc cap is on snugged but not completely clamped. Is that letting air in?
|
|
|
|
01-02-2011, 08:06 PM
|
#2 |
|
Registered User
Join Date: Feb 2010
Location: conway ar
Posts: 122
|
Re: Brake bleeding trouble
You might have to bleed the back wheels first. Start at the longest line, and work to the shortest. Make sure Your not leaking anywhere. I alway take the lid off of the mc, but im not sure if thats the right way or not.
|
|
|
|
|
01-02-2011, 08:09 PM
|
#3 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Brake bleeding trouble
pin on prop valve must b clamped in center//good directions on proper bleeding of brakes in factory service manual
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
01-02-2011, 08:59 PM
|
#4 |
|
Registered User
Join Date: Oct 2009
Location: san diego, ca
Posts: 14
|
Re: Brake bleeding trouble
alright just noticed rr is leaking now probably the wheel cylinder. will the let air into front lines via prop valve
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
