Hazel the older Sister.... - Page 30 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Black Widow Customs · 01-04-2011, 01:15 AM

Sikk Build.. I Apologize if i missed it but what size are your new billets.. Tires.. Etc,, Look So good

72BlckButy · 01-04-2011, 08:29 AM

Quote:

Originally Posted by Black Widow Customs

Sikk Build.. I Apologize if i missed it but what size are your new billets.. Tires.. Etc,, Look So good

I think I can speak up and say that the tires are Toyo Proxes S/T ii's.

I'll let n2billet fill in the rest.

**67cheby** · 01-04-2011, 10:28 AM

WOW...love the DIMPLES

gcburdic · 01-04-2011, 10:32 AM

Quote:

Originally Posted by 72BlckButy

Speedholes on the header too?

Looks good.

Quote:

Originally Posted by FRENCHBLUE72

Nice touch with the dimples...

Quote:

Originally Posted by n2billet

The speedholes-dimples will run all the way around the inside of the bed when I'm finished.....I just need to take it back apart again to do it.....may be awhile

Got a dumb question...These "speedholes" or dimples you guys speak of....is it a "look" thing or do they have a purpose??

SCOTI · 01-04-2011, 01:24 PM

Quote:

Originally Posted by gcburdic

Got a dumb question...These "speedholes" or dimples you guys speak of....is it a "look" thing or do they have a purpose??

They can add support/rigidity to larger pieces of flat sheet metal & w/less material, there's less weight. On these trucks, it's usually just for the 'look'.

jasonhall · 01-04-2011, 02:11 PM

With raising the bed 9 inches how much room between your notch and floor?

Cole Trickle · 01-04-2011, 02:43 PM

Great build......

kart34 · 01-04-2011, 03:59 PM

I am digging those speed holes !!!

n2billet · 01-04-2011, 08:20 PM

Quote:

Originally Posted by SCOTI

They can add support/rigidity to larger pieces of flat sheet metal & w/less material, there's less weight. On these trucks, it's usually just for the 'look'.

These were added for strength, I cut the bottom of the panel off so it needed something to make it rigid again.

Quote:

Originally Posted by jasonhall

With raising the bed 9 inches how much room between your notch and floor?

I'm a 1/4 off the air fitting, I made spacers that sit on the notch in case the floor tries to bow under pressure from weight (if I ever haul anything).

Quote:

Originally Posted by kart34

I am digging those speed holes !!!

It's getting more!! Not as many as yours but getting a few added here and there.

SCOTI · 01-04-2011, 08:50 PM

Hhmm.... There used to be a 'finished' gas filler in the bed floor & now I just see an empty hole. Care to elaborate on WTF happened there?

72BlckButy · 01-04-2011, 09:07 PM

Good question SCOTI... I noticed that too.

n2billet · 01-04-2011, 09:09 PM

Quote:

Originally Posted by SCOTI

Hhmm.... There used to be a 'finished' gas filler in the bed floor & now I just see an empty hole. Care to elaborate on WTF happened there?

I had this made.....

kart34 · 01-04-2011, 09:29 PM

Way Trick I need one of those !!!!!

aggie91 · 01-04-2011, 09:41 PM

WOW, that is nice!

SCOTI · 01-04-2011, 10:01 PM

Quote:

Originally Posted by n2billet

I had this made.....

Man, I need to swing by. It's been a while since I've said "you suck" in person vs. here on the net . . .....

n2billet · 01-04-2011, 11:25 PM

Quote:

Originally Posted by SCOTI

Man, I need to swing by. It's been a while since I've said "you suck" in person vs. here on the net . . .....

I've had that gas cap on my work bench for 8 months or so and you've walked right past it.........oh the "you suck" is my line!

67chevy1series · 01-04-2011, 11:38 PM

you guys are funny! i hope one day i can meet you two!

Painter D · 01-04-2011, 11:50 PM

Very cool, I like the raised bed floor, I like the gas cap, and I really like the speedholes. Seeing all this nice progress makes me want to take another look at my truck.

67chevy1series · 01-04-2011, 11:58 PM

Quote:

Originally Posted by 67chevy1series

hey keith was this truck equiped with arm rests ?? . how will you grt the same green color on them again if it did have them

are my posts visible??? oh well

n2billet · 01-05-2011, 12:11 AM

Quote:

Originally Posted by 67chevy1series

are my posts visible??? oh well

Visible but missed........it came with them and I painted them to match the new interior.....

67chevy1series · 01-05-2011, 12:13 AM

cool how is the paint sticking to them?

67chevy1series · 01-05-2011, 12:14 AM

oh and you should CLR the bed floor and then clear coat it just my 2 cents

n2billet · 01-05-2011, 12:25 AM

Quote:

Originally Posted by 67chevy1series

cool how is the paint sticking to them?

gravity

I used a flex additive in the paint......

Quote:

Originally Posted by 67chevy1series

oh and you should CLR the bed floor and then clear coat it just my 2 cents

I've had a jug of CLR sitting in the garage waiting for a year.......no clear coat, I'll just keep wiping it down to minimize the rust.

67chevy1series · 01-05-2011, 12:28 AM

Quote:

Originally Posted by n2billet

gravity

I used a flex additive in the paint......

I've had a jug of CLR sitting in the garage waiting for a year.......no clear coat, I'll just keep wiping it down to minimize the rust.

you havent done it yet though??

n2billet · 01-05-2011, 11:41 PM

I went ahead and popped holes all the way around the bed, now I need to sand and paint behind them.

01-04-2011, 01:15 AM	#726
Black Widow Customs Registered User Join Date: Dec 2008 Location: Tucson, Az. Posts: 75	Re: Hazel the older Sister.... Sikk Build.. I Apologize if i missed it but what size are your new billets.. Tires.. Etc,, Look So good

01-04-2011, 10:28 AM	#728
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Hazel the older Sister.... WOW...love the DIMPLES __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-04-2011, 02:11 PM	#731
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: Hazel the older Sister.... With raising the bed 9 inches how much room between your notch and floor?

01-04-2011, 02:43 PM	#732
Cole Trickle C-10 Club Member Join Date: Mar 2010 Location: Corona,CA Posts: 1,001	Re: Hazel the older Sister.... Great build...... __________________ 1969 Short Fleet 350/SM465 4.5/6.5 ECE drop 20" Raceline Wheels 1998 2dr Tahoe 5/7 drop 20"/22" Coys-sold Build thread...http://67-72chevytrucks.com/vboard/s...d.php?t=401910

01-04-2011, 03:59 PM	#733
kart34 Registered User Join Date: Jul 2009 Location: Blooming Prairie, Minnesota Posts: 673	Re: Hazel the older Sister.... I am digging those speed holes !!!

01-04-2011, 08:50 PM	#735
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,144	Re: Hazel the older Sister.... Hhmm.... There used to be a 'finished' gas filler in the bed floor & now I just see an empty hole. Care to elaborate on WTF happened there? Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 01-04-2011 at 08:55 PM.

01-04-2011, 09:07 PM	#736
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hazel the older Sister.... Good question SCOTI... I noticed that too. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-04-2011, 09:29 PM	#738
kart34 Registered User Join Date: Jul 2009 Location: Blooming Prairie, Minnesota Posts: 673	Re: Hazel the older Sister.... Way Trick I need one of those !!!!!

01-04-2011, 09:41 PM	#739
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Hazel the older Sister.... WOW, that is nice! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-04-2011, 11:38 PM	#742
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... you guys are funny! i hope one day i can meet you two!

01-04-2011, 11:50 PM	#743
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: Hazel the older Sister.... Very cool, I like the raised bed floor, I like the gas cap, and I really like the speedholes. Seeing all this nice progress makes me want to take another look at my truck. __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5 Last edited by Painter D; 01-04-2011 at 11:51 PM.

01-05-2011, 12:13 AM	#746
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... cool how is the paint sticking to them?

01-05-2011, 12:14 AM	#747
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... oh and you should CLR the bed floor and then clear coat it just my 2 cents

01-05-2011, 11:41 PM	#750
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... I went ahead and popped holes all the way around the bed, now I need to sand and paint behind them. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.