NE WTB: throttle linkage for a 6 cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nplocoman · 01-01-2011, 04:46 PM

Needing the crank arm, pivot hinge bolt and throttle cable mount for a 6 banger. I don't need the shift down bracket for the auto trans. Also need the linkage that looks like wire rod in this pic. I am not sure if that is factory or home bent. Any help?

**Classic Bowties** · 01-01-2011, 08:02 PM

I just got in a 71 custom/10 with a 250 I/6 and 4 speed, should have what you are after. Still on the trailer yet, I can try and get you some pics. Mel

nplocoman · 01-01-2011, 10:16 PM

Super! let me know what you find. If any one else has somthing please speek up. I will buy from Classic first of course. Not that any one is looking , but I have the non-cable set up if anyone is needing it.

**NGN** · 01-02-2011, 11:41 AM

I'm interrested in your none cable set up. Any pic ? Thanks NICK.

nplocoman · 01-02-2011, 05:43 PM

This is the rod type linkage. The vicegrips are holding the position. I would have to make a hole approximately 1" to get the pedal rod portion inside the cab. then drill the three screw holes to hold the pedal hinge plate. I can make this work but, would like to stay with the cable type on the newer cab.

nplocoman · 01-03-2011, 08:34 AM

Still looking

nplocoman · 01-03-2011, 06:11 PM

Ttt

**NGN** · 01-03-2011, 08:20 PM

Thanks for the pic's . But I was thinking it was for a automatic set up. Thanks again Nick

nplocoman · 01-03-2011, 09:46 PM

Still looking for the cable linkage.

**Classic Bowties** · 01-03-2011, 09:48 PM

Here are the six cylinder throttle parts I mentioned, these were just removed from a 71 custom/10 with a 250 I-6 & 4-speed. Everything is there except for the short piece that snaps onto the carb ball stud from the pivot link ball stud, truck came in w/o carb and that short link was probably removed with the carb. Throttle cable looks to be oe '71 and does slide in/out nice but it does have a few strands sticking out off each end, still usable as is though. You can have all that is pictured for $40.+ship., if interested pm me your ship to Zip along with an e-mail address and I can send you an invoice thru paypal. Mel

*sharpie1972* · 01-03-2011, 09:54 PM

Needle in a haystack is found! Great job & great price Mel! Sharpie

nplocoman · 01-04-2011, 08:14 AM

Sold, PM sent.

**Classic Bowties** · 01-04-2011, 04:02 PM

Quote:

Originally Posted by sharpie1972

Needle in a haystack is found! Great job &
great price Mel! Sharpie

Even though it is a harder setup to find, I was trying to help him out some and priced it the same as the commonly found 71/72 V/8 cable & pedal setups. Thanks for the attaboy, Mel

Quote:

Originally Posted by nplocoman

Sold, PM sent.

Pm returned, and an invoice has been sent thru paypal to your e-mail address.

nplocoman · 01-04-2011, 05:32 PM

Thanks again Mel. This sight is great thanks to people like you!!!!

01-01-2011, 04:46 PM	#1
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	WTB: throttle linkage for a 6 cylinder Needing the crank arm, pivot hinge bolt and throttle cable mount for a 6 banger. I don't need the shift down bracket for the auto trans. Also need the linkage that looks like wire rod in this pic. I am not sure if that is factory or home bent. Any help? Attached Images Last edited by nplocoman; 01-01-2011 at 04:48 PM.

01-01-2011, 08:02 PM	#2
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,550	Re: WTB: throttle linkage for a 6 cylinder I just got in a 71 custom/10 with a 250 I/6 and 4 speed, should have what you are after. Still on the trailer yet, I can try and get you some pics. Mel

01-01-2011, 10:16 PM	#3
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: WTB: throttle linkage for a 6 cylinder Super! let me know what you find. If any one else has somthing please speek up. I will buy from Classic first of course. Not that any one is looking , but I have the non-cable set up if anyone is needing it. Last edited by nplocoman; 01-01-2011 at 10:18 PM.

01-02-2011, 11:41 AM	#4
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 823	Re: WTB: throttle linkage for a 6 cylinder I'm interrested in your none cable set up. Any pic ? Thanks NICK.

01-02-2011, 05:43 PM	#5
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: WTB: throttle linkage for a 6 cylinder This is the rod type linkage. The vicegrips are holding the position. I would have to make a hole approximately 1" to get the pedal rod portion inside the cab. then drill the three screw holes to hold the pedal hinge plate. I can make this work but, would like to stay with the cable type on the newer cab. Attached Images

01-03-2011, 08:34 AM	#6
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: WTB: throttle linkage for a 6 cylinder Still looking

01-03-2011, 06:11 PM	#7
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: WTB: throttle linkage for a 6 cylinder Ttt

01-03-2011, 08:20 PM	#8
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 823	Re: WTB: throttle linkage for a 6 cylinder Thanks for the pic's . But I was thinking it was for a automatic set up. Thanks again Nick

01-03-2011, 09:46 PM	#9
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: WTB: throttle linkage for a 6 cylinder Still looking for the cable linkage. Last edited by nplocoman; 01-03-2011 at 09:48 PM.

01-03-2011, 09:48 PM	#10
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,550	Re: WTB: throttle linkage for a 6 cylinder Here are the six cylinder throttle parts I mentioned, these were just removed from a 71 custom/10 with a 250 I-6 & 4-speed. Everything is there except for the short piece that snaps onto the carb ball stud from the pivot link ball stud, truck came in w/o carb and that short link was probably removed with the carb. Throttle cable looks to be oe '71 and does slide in/out nice but it does have a few strands sticking out off each end, still usable as is though. You can have all that is pictured for $40.+ship., if interested pm me your ship to Zip along with an e-mail address and I can send you an invoice thru paypal. Mel Attached Images

01-03-2011, 09:54 PM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: WTB: throttle linkage for a 6 cylinder Needle in a haystack is found! Great job & great price Mel! Sharpie

01-04-2011, 08:14 AM	#12
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: WTB: throttle linkage for a 6 cylinder Sold, PM sent.

01-04-2011, 05:32 PM	#14
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: WTB: throttle linkage for a 6 cylinder Thanks again Mel. This sight is great thanks to people like you!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.