Who Sold rear bumper Brackets for a Leaf Spring 2wd frame ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72MARIO · 06-28-2003, 10:20 AM

I need to get a pair soon. I remember some vendor said that they were avaible soon.

Thanks

69 Short Fleet · 06-28-2003, 11:45 AM

If I remember right I think it was Wes at Classic Heartbeat, later Doug

*Gee_Emm* · 06-28-2003, 01:24 PM

I used regular sport bumper brackets on my 3/4 ton leaf 2wd and they work just fine.

72MARIO · 06-28-2003, 01:25 PM

Wierd..

*Gee_Emm* · 06-28-2003, 01:30 PM

I thought they were different too, but after asking on here it was determined that there is no difference in the brackets or the difference was minimal, I cant remember which it was.

69 Short Fleet · 06-28-2003, 02:40 PM

They need some grinding done to them so the bumper can be adjusted more towards the ground. I can't open my tailgate after I tightened up the 4 bolts (the bolts that go through the frame rails) as the bumper now sits a little too high. But I've never got around to it as of yet. At least thats how it is on my truck (rear leafs C/10), regards Doug

06-28-2003, 10:20 AM	#1
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Who Sold rear bumper Brackets for a Leaf Spring 2wd frame ? I need to get a pair soon. I remember some vendor said that they were avaible soon. Thanks __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

06-28-2003, 01:25 PM	#4
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Wierd.. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

06-28-2003, 11:45 AM	#2
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	If I remember right I think it was Wes at Classic Heartbeat, later Doug

06-28-2003, 01:24 PM	#3
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I used regular sport bumper brackets on my 3/4 ton leaf 2wd and they work just fine.

06-28-2003, 01:30 PM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I thought they were different too, but after asking on here it was determined that there is no difference in the brackets or the difference was minimal, I cant remember which it was.

06-28-2003, 02:40 PM	#6
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	They need some grinding done to them so the bumper can be adjusted more towards the ground. I can't open my tailgate after I tightened up the 4 bolts (the bolts that go through the frame rails) as the bumper now sits a little too high. But I've never got around to it as of yet. At least thats how it is on my truck (rear leafs C/10), regards Doug



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.