looked at a K20 parts truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 01-15-2011, 02:28 PM

Checked out this nearby truck this am. Frame isn't pitted but the rear end is some and springs are too rusty to use. 350 hasn't run for years, base model with few options but the options that are there are pretty good ones. The floor board option must be referring to the bed wood floor. NP205 He was asking for 1100, I've got a project waiting in Oregon so I only offered $550 thinking maybe someday I'd convert my C20. He passed and didn't counter since he had another guy interested. Just thought I'd share some pics

Oh and the cab mounts were so shot you could wiggle the cab on the frame.

**LockDoc** · 01-15-2011, 02:56 PM

-
Must have been a plow truck. looks like the front axle shaft is hanging down too.. Yep, that would be a pass...

LockDoc

67chevy1series · 01-15-2011, 03:04 PM

i think it is talkin about a metal floor , my 67 had a wood floor and ''floor board ''isnt on the spid

Sicklajoie · 01-15-2011, 03:22 PM

Too bad. That truck must've been pretty sweet back in the day.

Vintage Windmills · 01-15-2011, 05:07 PM

Quote:

Originally Posted by 67chevy1series

i think it is talkin about a metal floor , my 67 had a wood floor and ''floor board ''isnt on the spid

I think they changed the terminology around 71 since the wood floor ones I've seen say Pickup Box Flr or something close to. This 72 had the remnants of a wood floor.

Vintage Windmills · 01-15-2011, 05:10 PM

Quote:

Originally Posted by LockDoc

-
Must have been a plow truck. looks like the front axle shaft is hanging down too.. Yep, that would be a pass...

LockDoc

Could have been at one time. The story was that it was used around a service station to push cars around and that would make sense with the bumper thats on there. I'm not sure why they unbolted the shaft from the transfer case.

**special-K** · 01-15-2011, 08:20 PM

Floor board definitely refers to wood floor since steel floors are standard. The seller has high hopes. Did you leave your number? It might be worth the $550 for the power steering,NP205/TH350,and axles for your '67. Also,the narrower spring hangers,etc

Vintage Windmills · 01-16-2011, 12:38 AM

Yep, left my phone number. I could also use the rear bumper and black door panels in this truck. When did the spring hangers change?

I'm thinking I'll leave the 67 pretty original unless its parts have already been swapped or are too far gone. I know the older running gear isn't as desireable but I'm thinking I'll just restore that truck and let it live an easy life.

**special-K** · 01-16-2011, 08:55 AM

I like the idea of leaving the '67 original as long as it's practical for you. You can certainly keep cheap spare replacement parts/units around with all the cast-offs from those who swap-out to newer stuff on day one. The truck restored would be a nice example rarely found.
The springs got narrower in '69,so the hangers changed then.

01-15-2011, 02:28 PM	#1
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	looked at a K20 parts truck Checked out this nearby truck this am. Frame isn't pitted but the rear end is some and springs are too rusty to use. 350 hasn't run for years, base model with few options but the options that are there are pretty good ones. The floor board option must be referring to the bed wood floor. NP205 He was asking for 1100, I've got a project waiting in Oregon so I only offered $550 thinking maybe someday I'd convert my C20. He passed and didn't counter since he had another guy interested. Just thought I'd share some pics Oh and the cab mounts were so shot you could wiggle the cab on the frame. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-15-2011, 02:56 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,423	Re: looked at a K20 parts truck - Must have been a plow truck. looks like the front axle shaft is hanging down too.. Yep, that would be a pass... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-15-2011, 03:04 PM	#3
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: looked at a K20 parts truck i think it is talkin about a metal floor , my 67 had a wood floor and ''floor board ''isnt on the spid

01-15-2011, 03:22 PM	#4
Sicklajoie The Niner Join Date: Nov 2010 Location: Broad Brook, CT Posts: 2,493	Re: looked at a K20 parts truck Too bad. That truck must've been pretty sweet back in the day. __________________ "A good racer is one whose head is in communication with his balls." - Richie Evans 1970 C/20 - 402/TH400/3.54s - 74K miles 2003 GMC Sierra 2500 - Wheatland Yellow Niner Progression Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697183 Classic Trucks article: https://www.motortrend.com/features/...et-c20-driven/

01-15-2011, 08:20 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: looked at a K20 parts truck Floor board definitely refers to wood floor since steel floors are standard. The seller has high hopes. Did you leave your number? It might be worth the $550 for the power steering,NP205/TH350,and axles for your '67. Also,the narrower spring hangers,etc __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-16-2011 at 08:50 AM.

01-16-2011, 12:38 AM	#8
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: looked at a K20 parts truck Yep, left my phone number. I could also use the rear bumper and black door panels in this truck. When did the spring hangers change? I'm thinking I'll leave the 67 pretty original unless its parts have already been swapped or are too far gone. I know the older running gear isn't as desireable but I'm thinking I'll just restore that truck and let it live an easy life. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-16-2011, 08:55 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: looked at a K20 parts truck I like the idea of leaving the '67 original as long as it's practical for you. You can certainly keep cheap spare replacement parts/units around with all the cast-offs from those who swap-out to newer stuff on day one. The truck restored would be a nice example rarely found. The springs got narrower in '69,so the hangers changed then. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.