'64 GMC Steering Wheel Diagram? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andice · 01-09-2011, 05:09 PM

When I pulled the steering wheel off last weekend a small, split, cylindrical bushing feel out of the back of the wheel as I was about to lay the wheel down on the truck seat. Does this bushing go inside the opening on the back side of the wheel? Or do I slip it down on the column shaft? It seems like it may come into contact with the horn contact ring and possibly distort the ring and/or the upper column bushing as I torque down the wheel upon re-install. One end of this bushing is tapered. Taper up or taper down when re-installed? I'll go out and take an image or two of this bushing. An original assembly diagram would be appreciated. Thanks in advance.

Andice · 01-09-2011, 06:46 PM

Here is an image of the bushing. Notice the tapered end.

**Clyde65** · 01-09-2011, 06:46 PM

I believe that is the turn signal canceling cam.

Andice · 01-09-2011, 06:57 PM

Methinks the canceling cam is black plastic and still screwed to the back of the wheel. This piece is thin metal.

Andice · 01-16-2011, 12:19 PM

at

01-09-2011, 05:09 PM	#1
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	'64 GMC Steering Wheel Diagram? When I pulled the steering wheel off last weekend a small, split, cylindrical bushing feel out of the back of the wheel as I was about to lay the wheel down on the truck seat. Does this bushing go inside the opening on the back side of the wheel? Or do I slip it down on the column shaft? It seems like it may come into contact with the horn contact ring and possibly distort the ring and/or the upper column bushing as I torque down the wheel upon re-install. One end of this bushing is tapered. Taper up or taper down when re-installed? I'll go out and take an image or two of this bushing. An original assembly diagram would be appreciated. Thanks in advance.

01-09-2011, 06:46 PM	#2
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: '64 GMC Steering Wheel Diagram? Here is an image of the bushing. Notice the tapered end. Attached Images

01-09-2011, 06:46 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: '64 GMC Steering Wheel Diagram? I believe that is the turn signal canceling cam. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-09-2011, 06:57 PM	#4
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: '64 GMC Steering Wheel Diagram? Methinks the canceling cam is black plastic and still screwed to the back of the wheel. This piece is thin metal.

01-16-2011, 12:19 PM	#5
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: '64 GMC Steering Wheel Diagram? at Last edited by Andice; 02-21-2011 at 06:24 PM. Reason: a t



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.