Power steering pump mounting

[glider_6969]

Hey Guys, need some help again.

I am going to upgrade the manual steering to power. I have the pump and the gear box, but wondering if anyone hear has any pictures of the pump mounted. The motor is a 350, and my alternator is on the right side of motor. I need to see what brackets are needed to mount it to the motor, this is what I have, I think I am missing one that goes mounted from the motor or head to the smaller bracket on the right of the pump in the picture. I'm sure there are pictures here, but I can't seem to find some that show what I am looking for. Thank again.

[john]

I dont have a pic, but you are missing an "L" shaped bracket from end exhaust manifold bolt to the adj. bracket shown to fasten to.

[JimKshortstep4x4]

Here is a picture. As John mentioned you are missing the bracket that the adjuster bolts to.

Jim

[kev2809]

maybe you can use one like this?


it came off my 305 with ram horns but it wont fit my other 305 (i have different manifolds on that one). i had it powdercoated last year but never used it.

btw, i have those same exact brackets and pulley you posted in the first pic

[glider_6969]

Originally Posted by JimKshortstep4x4

Here is a picture. As John mentioned you are missing the bracket that the adjuster bolts to.

Jim

Hey Jim,

that's exactly what I was looking for, I knew I could count on you guys. It should be easy enough to find. I just may have to add a spacer, since I have headers on it .

Thanks again,,