WHEEL HELP .... 20" Dodge Spares - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ratty 46 · 01-24-2011, 10:37 PM

I believe I read, on a thread here, that someone scored a source for dodge pickup spare wheels in the 20" design for a very reasonable price.

Ya ... I know ... I should have wrote it down right then & there but this kidney stone has my mind off in many painfull directions.

Any info is appreciated.

Ratty 46

troy54gmc · 01-25-2011, 02:37 AM

Hey Ratty, the cheapest place i found them was on e-bay $76.00 a piece. believe it or not i called a local dealer here and they want $255.00 a piece and that doesnt include the tire.

jmedero · 01-25-2011, 02:40 AM

There is a craigslist ad here in Pensacola about a guy with a set cheap. Check it out.
Posted via Mobile Device

bretcopsey · 01-25-2011, 10:07 AM

From this thread:
http://67-72chevytrucks.com/vboard/s...t=dodge+wheels

Quote:

Originally Posted by jmlcolorado

A bit slow on the draw, like over a year late, but maybe guys looking at this thread can use this.

http://www.wheelsandcaps.com/w_selec..._MODEL=RAM1500

$66 on this site. I just ordred 3 for 275 shipped.
Hope this helps other guys out.

cajundragger · 01-25-2011, 11:44 AM

I have another set of 4 matching wheels.

keep in mind some have round holes and some have oval holes.

sgtusmc · 01-25-2011, 02:50 PM

Quote:

Originally Posted by cajundragger

I have another set of 4 matching wheels.

keep in mind some have round holes and some have oval holes.

Is that right??? I never noticed. I bet I'm running both the round & oval, It's just my luck...haha

Kabwe · 01-25-2011, 03:45 PM

Quote:

Originally Posted by troy54gmc

Hey Ratty, the cheapest place i found them was on e-bay $76.00 a piece. believe it or not i called a local dealer here and they want $255.00 a piece and that doesnt include the tire.

Troy54gmc, I believe whatever you say about dealer prices.lol

Quote:

Originally Posted by sgtusmc

Is that right??? I never noticed. I bet I'm running both the round & oval, It's just my luck...haha

lol. Looks like you and I have the same luck my friend, but we keep it pushing right?lol

Dan Bowles · 01-25-2011, 05:35 PM

FYI. Typical dealer mark up is 300%. I'm a supplier.

Anybody know who makes those OE Dodge spares? I'm a GM supplier but am in the same group as the Tire/Wheel guys.

chevyrestoguy · 01-25-2011, 05:54 PM

Do you guys plan on redrilling your axles and rotors to a 5X5.5" bolt pattern?

Dodge trucks of those years are 5X5.5. I even Googled it to make sure.

cajundragger · 01-25-2011, 06:02 PM

I had moser make me axles and had custom front rotors machined.

ratty 46 · 01-25-2011, 06:56 PM

I don't have axles yet & hubs are not an issue either cause I've not order them & the wilwid hats can be changed out.

Thanks for all the help.

I knew I'd seen it .... I also made a comment on the thread I was looking for ... the last
comment. - ThX CD & bretcopsey.

01-24-2011, 10:37 PM	#1
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	WHEEL HELP .... 20" Dodge Spares I believe I read, on a thread here, that someone scored a source for dodge pickup spare wheels in the 20" design for a very reasonable price. Ya ... I know ... I should have wrote it down right then & there but this kidney stone has my mind off in many painfull directions. Any info is appreciated. Ratty 46

01-25-2011, 02:37 AM	#2
troy54gmc Registered User Join Date: Jan 2010 Location: surprise az Posts: 239	Re: WHEEL HELP .... 20" Dodge Spares Hey Ratty, the cheapest place i found them was on e-bay $76.00 a piece. believe it or not i called a local dealer here and they want $255.00 a piece and that doesnt include the tire. Last edited by troy54gmc; 01-25-2011 at 02:39 AM.

01-25-2011, 02:40 AM	#3
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: WHEEL HELP .... 20" Dodge Spares There is a craigslist ad here in Pensacola about a guy with a set cheap. Check it out. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-25-2011, 11:44 AM	#5
cajundragger Registered User Join Date: Aug 2006 Location: louisiana Posts: 1,008	Re: WHEEL HELP .... 20" Dodge Spares I have another set of 4 matching wheels. keep in mind some have round holes and some have oval holes.

01-25-2011, 05:35 PM	#8
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: WHEEL HELP .... 20" Dodge Spares FYI. Typical dealer mark up is 300%. I'm a supplier. Anybody know who makes those OE Dodge spares? I'm a GM supplier but am in the same group as the Tire/Wheel guys. Last edited by Dan Bowles; 01-25-2011 at 05:36 PM.

01-25-2011, 05:54 PM	#9
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: WHEEL HELP .... 20" Dodge Spares Do you guys plan on redrilling your axles and rotors to a 5X5.5" bolt pattern? Dodge trucks of those years are 5X5.5. I even Googled it to make sure. __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527

01-25-2011, 06:02 PM	#10
cajundragger Registered User Join Date: Aug 2006 Location: louisiana Posts: 1,008	Re: WHEEL HELP .... 20" Dodge Spares I had moser make me axles and had custom front rotors machined.

01-25-2011, 06:56 PM	#11
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	Re: WHEEL HELP .... 20" Dodge Spares I don't have axles yet & hubs are not an issue either cause I've not order them & the wilwid hats can be changed out. Thanks for all the help. I knew I'd seen it .... I also made a comment on the thread I was looking for ... the last comment. - ThX CD & bretcopsey. Last edited by ratty 46; 01-25-2011 at 07:13 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.