Out-braking the competition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michellenolimit** · 01-25-2011, 07:46 PM

New for 2011, we have finished the development of our 'ZG' Spindles and Rotors for all of our No Limit Wide Ride IFS kits. All Wide Ride's will now come STANDARD with 12" Drilled/Slotted Rotors.
You have a choice of 5 on 4 1/2", 5 on 4 3/4", 5 on 5, or 5 on 5 1/2" bolt circle. Our New 'ZG' Spindle has a forged one-piece caliper mount, using a common GM Full Size calipers

** Shown in the Top Picture is the New 'ZG' Spindle and 12" Rotor

** Shown in the bottom Picture is a Comparison, next to a 11" Rotor and GM Mid Sized Caliper

01-25-2011, 07:46 PM	#1
michellenolimit Junior Member Join Date: Nov 2010 Location: Norco, Ca. Posts: 40	Out-braking the competition New for 2011, we have finished the development of our 'ZG' Spindles and Rotors for all of our No Limit Wide Ride IFS kits. All Wide Ride's will now come STANDARD with 12" Drilled/Slotted Rotors. You have a choice of 5 on 4 1/2", 5 on 4 3/4", 5 on 5, or 5 on 5 1/2" bolt circle. Our New 'ZG' Spindle has a forged one-piece caliper mount, using a common GM Full Size calipers Shown in the Top Picture is the New 'ZG' Spindle and 12" Rotor Shown in the bottom Picture is a Comparison, next to a 11" Rotor and GM Mid Sized Caliper Attached Images __________________ Michelle No Limit Engineering Authorized Dealer for: Ridetech, Vintage Air, Painless, Ididit, Accuair, Flaming River, and many more



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.