Engine mount on frame. 6 cyl to V8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

grs · 01-26-2011, 12:28 PM

I can't fine ID numbers on the frame. It looks like the mount that bolts on the frame was moved forward. It is the mount that the engine mount bolts to. I believe it is covering the numbers up. Could the truck have had a 6 cyl. engine in it when new? Look at the picture. You can see another hole in the frame.

**lolife99** · 01-26-2011, 01:02 PM

There are 3 holes in the frame from the factory.
It could have had a 6-cylinder in it at one time,... but those are correct V-8 mounts in the correct location.

matthew20061 · 01-26-2011, 01:05 PM

Check your vin number on your title or in the door jamb or glove box and see if it starts with CS then it was originally a 6 cylinder but if it starts with CE then it was a V8. The S stands for six and the E stands for eight. Hope that helps, on my truck the frame number is located somewhat in front of the frame engine mount so I don't think its covered up, I would check carefully it might be covered with paint.

grs · 01-26-2011, 01:13 PM

Thanks. The Vin number starts with a CE. For some reason my frame does not have numbers. And no sign of being ground off.

01-26-2011, 12:28 PM	#1
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Engine mount on frame. 6 cyl to V8 I can't fine ID numbers on the frame. It looks like the mount that bolts on the frame was moved forward. It is the mount that the engine mount bolts to. I believe it is covering the numbers up. Could the truck have had a 6 cyl. engine in it when new? Look at the picture. You can see another hole in the frame. Attached Images

01-26-2011, 01:02 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Engine mount on frame. 6 cyl to V8 There are 3 holes in the frame from the factory. It could have had a 6-cylinder in it at one time,... but those are correct V-8 mounts in the correct location. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-26-2011, 01:05 PM	#3
matthew20061 69' Chevy Stepside Join Date: Mar 2008 Location: Anchorage, Ak Posts: 526	Re: Engine mount on frame. 6 cyl to V8 Check your vin number on your title or in the door jamb or glove box and see if it starts with CS then it was originally a 6 cylinder but if it starts with CE then it was a V8. The S stands for six and the E stands for eight. Hope that helps, on my truck the frame number is located somewhat in front of the frame engine mount so I don't think its covered up, I would check carefully it might be covered with paint. __________________ -Matthew -69' Chevy Custom/10 Shortbed Stepside 2WD "Copperhead" - Restored, 6.0L LQ9 Built. L92 Heads and LS3 Intake with Comp Cam 223/231 .610/.617 112 LSA, 4L60E with Shift Kit and Circle-D 3200 Stall Converter ~Build Thread -1957 Chevy BelAir 2 Door Post Sedan, Full Frame off Restoration done myself - 6.0L with T56 six speed -1957 Chevy BelAir 2 Door Post Sedan - Nearly rust free AK car, Project in the waiting -2003' Chevy Silverado SS AWD 6.0L! - Daily Driver

01-26-2011, 01:13 PM	#4
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Re: Engine mount on frame. 6 cyl to V8 Thanks. The Vin number starts with a CE. For some reason my frame does not have numbers. And no sign of being ground off.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.