The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-26-2011, 01:29 AM   #1
Critter
Future TOTM Winner
 
Critter's Avatar
 
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
Question 17x10 wheels, why don't they exist?

I'm talking about 8 lug wheels for a 3/4 ton 4x4 type vehicle...I guess 2wd people might also be interested.

I'm swapping 8 lug axles under my blazer and have tossed around the idea of using 17 inch wheels as opposed to 16s due to ever increasing availability and low cost of A/T tires for 17 inch wheels. I also want the 17 inch wheels to be 10 inchs wide. Most every style of wheel I like goes 17x8, then 17x9 then thats it. Is there a reason for this??? You can get a 15x10 and a 16x10 no problem (I believe 18s stop at 9" as well then once you get to 20s, a 10" wide is available again, but I'm not considering anything bigger than 17" diameter). At this point I'm just frustrated and wanting to know why more than anything! By the way, I'm faily modest when it comes to wheels, Classic IIs, "D" Windows, etc. I'm not going for the blinged out XD Rockstars or anything like that. Here is a centerline wheel that I have been drooling over for a while...once agian 17x8, 17x8.5, 17x9, the end. Anybody have any insight?

__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces)
72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts
2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver

Check it out www.lsdyno.com
Critter is offline   Reply With Quote
Old 01-26-2011, 10:52 PM   #2
OhOneWS6
Registered User
 
OhOneWS6's Avatar
 
Join Date: Dec 2009
Location: DFW, TX
Posts: 764
Re: 17x10 wheels, why don't they exist?

I'm betting it has something to do with load rating. The 8 lug wheels are for bigger trucks. The tires you are looking at do not meet the load rating for the trucks those 8 lug wheels will fit. Since there are no tires to meet that load rating in that width, there is no market for 8 lug wheels that wide.

Just a guess.
OhOneWS6 is offline   Reply With Quote
Old 01-27-2011, 12:17 AM   #3
Critter
Future TOTM Winner
 
Critter's Avatar
 
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
Re: 17x10 wheels, why don't they exist?

Quote:
Originally Posted by OhOneWS6 View Post
I'm betting it has something to do with load rating. The 8 lug wheels are for bigger trucks. The tires you are looking at do not meet the load rating for the trucks those 8 lug wheels will fit. Since there are no tires to meet that load rating in that width, there is no market for 8 lug wheels that wide.

Just a guess.
Hmm...good theory. I went and checked Nitto and BFG (2 of the brands I have been considering) and they both make quite a few D and E rated LT 17s that would need/could easily use a 10" wide rim. A lot of the Nittos even list the approved rim width as being 8.5"-11" wide. But you could be right that there just isn't ENOUGH of a market out there to justify it.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces)
72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts
2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver

Check it out www.lsdyno.com
Critter is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com