|
|
|
01-28-2011, 08:21 PM
|
#1 |
|
'67 C-10 LWB Driver
 
Join Date: Dec 2010
Location: Andover, Kansas
Posts: 380
|
Re: 67 C-10 project.
here's some mock up before and after of the wheels. huge improvement i think. can't wait to get them on there!of course i need to line up a 5 bolt rear end now...
__________________
'67 C-10 LWB - My Build Thread  '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad! |
|
|
|
01-28-2011, 08:28 PM
|
#2 |
|
'67 C-10 LWB Driver
Join Date: Dec 2010
Location: Andover, Kansas
Posts: 380
|
Re: 67 C-10 project.
then starting to take the motor out...so far i have the radiator off, the heater and radiator hoses. the starter and battery disconnected. the fuel pump disconnected, the choke and throttle cables disconnected. the oil pressure line disconnected, and ground wires disconnected...one motor mount bolt on each motor mount out...and about 5 of the tranny bolts. what i don't know and haven't figured out yet is how and where to disconnec the clutch shaft mechanism...i still need to get the hood off as well. Oh..and the license plate, and a face to put with a name!
__________________
'67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad! |
|
|
|
|
01-28-2011, 10:41 PM
|
#3 |
|
Registered User
Join Date: May 2009
Location: Carmichael, California
Posts: 576
|
Re: 67 C-10 project.
Alright! I like the new wheels, they are going to look sharp.
__________________
Eric  1967 C10 LWB SOLD....  1995 Ford F-250 4x4 Powerstroke, 342k "Each generation goes further than the generation preceding it because it stands on the shoulders of that generation. You will have opportunities beyond anything we've ever known." -Ronald Reagan |
|
|
|
|
01-28-2011, 10:52 PM
|
#4 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 67 C-10 project.
those are rallies! not steelies! you have the rims i have!
|
|
|
|
|
01-29-2011, 08:39 PM
|
#5 |
|
'67 C-10 LWB Driver
Join Date: Dec 2010
Location: Andover, Kansas
Posts: 380
|
Re: 67 C-10 project.
well, man was i busy today! i'm pretty proud of myself! And my son Zack was a great help to me as well! At 10 this morning I took all of my wheels down to a shop in Rose Hill and got all the tires dismounted. now i can get the rims cleaned up and painted. Then i himmed and hawed and tryed to figure out what to do about the rest of my parts. i decided to go ahead and pull the motor or at least try and get it pulled. i started on it yesterday. So anyways too make a long story short...not only did i get the motor pulled but i got the front crossmember pulled as well! sweet! Pictures first then i have a few questions...
__________________
'67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad! |
|
|
|
|
01-29-2011, 08:51 PM
|
#6 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 67 C-10 project.
 dayum youve been busy! nice work all that in a day! ready for the 5 lug and the 350 now!
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
