Who\what is this??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XXL · 07-02-2003, 11:32 AM

I'm looking for information on this booster setup (arrow on left). If you know the owner of this truck, know what setup that is, sell that setup, whatever... please let me know.

Thanks,

Kenneth

**CPNE** · 07-02-2003, 12:34 PM

Quote:

He used a Master Brakes 4whl disc set-up

The above is from the original post by SCOTI . I assumed this to mean Master Power Brakes . On their web page under the "Street Rods" section, they have a picture of a booster exactly like that one (Granted, not connected to firewall, but same booster). See below. Geez, do i hafta hit you over the head?

*Randy70C-10* · 07-02-2003, 12:50 PM

How about one that goes under the floor?

XXL · 07-02-2003, 01:45 PM

Quote:

Originally posted by CPNE

The above is from the original post by SCOTI . I assumed this to mean Master Power Brakes . On their web page under the "Street Rods" section, they have a picture of a booster exactly like that one (Granted, not connected to firewall, but same booster). See below. Geez, do i hafta hit you over the head?

Actually, if you could just come down here and install the thing for me, that would be great!

I've got an email in with MPB (above) and am waiting on a response. Their first response was to offer me a stock 9" setup with giant bracket. I sent him the gray truck pic but that didn't seem to help. One question I have of the one you show above is... are those holes in the bracket for moving the pivot point forward? And if so, does that let me cut off the excess bracket? That thing looks a little large to fit under the dash as is.

Thanks,

Kenneth

**CPNE** · 07-02-2003, 04:58 PM

Quote:

Actually, if you could just come down here and install the thing for me, that would be great!

I vote you shave the firewall on that side too and delete the brakes altogether! Too much clutter under the hood.

SCOTI · 07-02-2003, 06:57 PM

The owner of that truck said he went with the Master Power Brakes 4whl disc kit. He also said initially there were issues w/the amount of pedal he was getting so he switched to a different bore mstr cyl. than what came w/the kit.

Sorry, I forgot part of the companys name in my original post.

jay-dawg · 07-03-2003, 02:55 AM

I'd like to get that under cab brakes setup from Turner Enterprises. Does anyone know who else I should look? I was also looking at the Kugel 90 degree under-dash brake setup where the master cylinder is turned sideways. I don't know where the brake lines would go though though...OOOh...Kind of a scary thought!!

07-02-2003, 11:32 AM	#1
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Who\what is this??? I'm looking for information on this booster setup (arrow on left). If you know the owner of this truck, know what setup that is, sell that setup, whatever... please let me know. Thanks, Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

07-02-2003, 06:57 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,939	The owner of that truck said he went with the Master Power Brakes 4whl disc kit. He also said initially there were issues w/the amount of pedal he was getting so he switched to a different bore mstr cyl. than what came w/the kit. Sorry, I forgot part of the companys name in my original post. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-03-2003, 02:55 AM	#7
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	I'd like to get that under cab brakes setup from Turner Enterprises. Does anyone know who else I should look? I was also looking at the Kugel 90 degree under-dash brake setup where the master cylinder is turned sideways. I don't know where the brake lines would go though though...OOOh...Kind of a scary thought!! __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

07-02-2003, 12:50 PM	#3
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	How about one that goes under the floor?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.