Where to cut for HIGH HUMP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drewskiren · 02-02-2011, 06:37 PM

Does anybody have a picture or insight as to how the factory cut out a low hump to install a high hump. I can trace it and cut over 1 inch, but I want to make sure it looks factory.

sameyrasmea72 · 02-02-2011, 07:13 PM

Quote:

Originally Posted by drewskiren

........, but I want to make sure it looks factory.

It will fairly difficult to make it look factory. From the top, it won't matter because the carpet will cover it up. On the underside, from the factory, there were three strips maybe 3/4 of an inch wide that ran down the sides and the back side. These strips have the nuts welded to them and then the strip was spot welded to the bottom of the floor.

A lot of people add the high hump and it is not that difficult, but in your original post you said you wanted to make sure it LOOKED FACTORY. it can probably be done, but it won't be as easy as cutting a hole and bolting in the high hump.

drewskiren · 02-02-2011, 07:23 PM

Aha! This is what I was wondering, I knew they didn't have separate nuts and bolts.

Anybody got a pic of one removed?

rsavage · 02-02-2011, 07:27 PM

Here's one from the top on my Burb:

"

"

**Classic Heartbeat** · 02-02-2011, 09:09 PM

Here is one I cut out to make a high tunnel cab out of it. WES

drewskiren · 02-02-2011, 10:29 PM

Thanks everyone!

02-02-2011, 06:37 PM	#1
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Where to cut for HIGH HUMP Does anybody have a picture or insight as to how the factory cut out a low hump to install a high hump. I can trace it and cut over 1 inch, but I want to make sure it looks factory. __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

02-02-2011, 07:23 PM	#3
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Where to cut for HIGH HUMP Aha! This is what I was wondering, I knew they didn't have separate nuts and bolts. Anybody got a pic of one removed? __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

02-02-2011, 07:27 PM	#4
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Where to cut for HIGH HUMP Here's one from the top on my Burb: "" __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

02-02-2011, 09:09 PM	#5
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Where to cut for HIGH HUMP Here is one I cut out to make a high tunnel cab out of it. WES Attached Images __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

02-02-2011, 10:29 PM	#6
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Where to cut for HIGH HUMP Thanks everyone! __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.