Blazers for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Radiatta_71 · 07-01-2003, 01:22 AM

For Sale 1971 & 1972 Blazer Projects

Sadly I’m gonna let these projects go... I have had intentions on fixing up the 71 for several years and then I picked up the ’72 because it had an AC cab and I was going to restore that one instead. Now I have two projects and no time or the room to work on either one of them.

Here is the info:

’71 Blazer CST 350/350 205 t-case. 6" suspension lift, original running gear. full roll cage. Body needs some attention. I put a different front clip on. The drivers bedsides has a fair bit of bondo in it and they both have a few places where there is some surface rust from the paint chipping off. Drivers side needs a little rust repair in rear corner. Drivers side door should really be replaced. Passenger side is ok. The rockers panels are just riveted on at the moment and the drivers side needs the inner part welded in. This is a CST and I have most of the trim. The front seats need to be re-upholstered. The rear seat is ok shape for its age. The engine runs strong and was rebuilt about 5 years ago. I maybe put 1000 miles on it a year. The engine is mostly stock with the exception of a Edelbrock performer manifold, 4bbl Edelbrock carb and HEI distributor. Double wall top is ok. Hatch has seen better days. Has brand new 33”-12.5 BFG Mud Terrains and white spoke wheels.

’72 Blazer 350/350 205 t-case 12 bolt factory posi. AC (not working) Body also needs attention. Interior isn’t all that bad. Single wall hardtop is in fair shape hatch works but is sticky and is cracked. Engine runs really strong has headers and maybe a different cam then stock. Has new water pump and new blower motor.
I am asking $5000 for the both OBO. I will even throw in some misc. parts. I would rather sell them as a package but I will separate. $3500 for the ’71 and $2000 for the '72

I can post more pictures. Just let me know what you want to see.
any questions just email me @ radiatta@comcast.net

LeRoy · 07-01-2003, 09:54 AM

I'd like to see some pics of the 71 and one or two of the 72. Thanks

Radiatta_71 · 07-01-2003, 10:14 AM

I am having trouble posting a pic. I have posted a picture before now I can't do it. Can anyone help. Can I still grab an attachment from my hard drive or do I ave to upload it to a web site?

chevy_fatman · 07-01-2003, 10:39 AM

You can still attach pics from your hard drive, just click on the "browse" button on the reply and choose your pic, just make sure that the pics aren't too big.

Good luck selling the blazers.

bouncytruck · 07-01-2003, 12:01 PM

If your still having troubles with the photos, send the them to me at chris@imageink.com and I'll post them for you.

bouncytruck · 07-02-2003, 11:16 AM

Here is the photos...

Radiatta_71 · 07-02-2003, 11:39 PM

Thanks for posting the photo!

LeRoy · 07-03-2003, 01:23 PM

Thanks for the photos. Are you sure that's a 6" lift or maybe 35" tires? What brand of lift is it? Front and rear springs or blocks? Do you have any pics of the rust and rollcage?

bouncytruck · 07-03-2003, 03:37 PM

Leroy, his listing says "6" suspension lift..." & "Has brand new 33”-12.5 BFG Mud Terrains" - If your reading my sig, I just posted the picture for him.

Radiatta_71 · 07-03-2003, 07:06 PM

It is in fact a 6" suspension lift. Superlift front springs and blocks in the rear. Give me your email address and I will email you some pictures of the cage and rusty areas.

07-01-2003, 01:22 AM	#1
Radiatta_71 Registered User Join Date: Jul 2002 Location: Vancouver, WA Posts: 117	Blazers for sale For Sale 1971 & 1972 Blazer Projects Sadly I’m gonna let these projects go... I have had intentions on fixing up the 71 for several years and then I picked up the ’72 because it had an AC cab and I was going to restore that one instead. Now I have two projects and no time or the room to work on either one of them. Here is the info: ’71 Blazer CST 350/350 205 t-case. 6" suspension lift, original running gear. full roll cage. Body needs some attention. I put a different front clip on. The drivers bedsides has a fair bit of bondo in it and they both have a few places where there is some surface rust from the paint chipping off. Drivers side needs a little rust repair in rear corner. Drivers side door should really be replaced. Passenger side is ok. The rockers panels are just riveted on at the moment and the drivers side needs the inner part welded in. This is a CST and I have most of the trim. The front seats need to be re-upholstered. The rear seat is ok shape for its age. The engine runs strong and was rebuilt about 5 years ago. I maybe put 1000 miles on it a year. The engine is mostly stock with the exception of a Edelbrock performer manifold, 4bbl Edelbrock carb and HEI distributor. Double wall top is ok. Hatch has seen better days. Has brand new 33”-12.5 BFG Mud Terrains and white spoke wheels. ’72 Blazer 350/350 205 t-case 12 bolt factory posi. AC (not working) Body also needs attention. Interior isn’t all that bad. Single wall hardtop is in fair shape hatch works but is sticky and is cracked. Engine runs really strong has headers and maybe a different cam then stock. Has new water pump and new blower motor. I am asking $5000 for the both OBO. I will even throw in some misc. parts. I would rather sell them as a package but I will separate. $3500 for the ’71 and $2000 for the '72 I can post more pictures. Just let me know what you want to see. any questions just email me @ radiatta@comcast.net

07-01-2003, 09:54 AM	#2
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	I'd like to see some pics of the 71 and one or two of the 72. Thanks __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

07-01-2003, 10:39 AM	#4
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	You can still attach pics from your hard drive, just click on the "browse" button on the reply and choose your pic, just make sure that the pics aren't too big. Good luck selling the blazers. __________________ Paul How do you make the invisible, visible?.........You take it away.

07-01-2003, 12:01 PM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	If your still having troubles with the photos, send the them to me at chris@imageink.com and I'll post them for you. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-02-2003, 11:16 AM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Here is the photos... __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L Last edited by bouncytruck; 01-12-2006 at 05:08 PM.

07-01-2003, 10:14 AM	#3
Radiatta_71 Registered User Join Date: Jul 2002 Location: Vancouver, WA Posts: 117	I am having trouble posting a pic. I have posted a picture before now I can't do it. Can anyone help. Can I still grab an attachment from my hard drive or do I ave to upload it to a web site?

07-02-2003, 11:39 PM	#7
Radiatta_71 Registered User Join Date: Jul 2002 Location: Vancouver, WA Posts: 117	Thanks for posting the photo!

07-03-2003, 01:23 PM	#8
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	Thanks for the photos. Are you sure that's a 6" lift or maybe 35" tires? What brand of lift is it? Front and rear springs or blocks? Do you have any pics of the rust and rollcage? __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

07-03-2003, 03:37 PM	#9
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Leroy, his listing says "6" suspension lift..." & "Has brand new 33”-12.5 BFG Mud Terrains" - If your reading my sig, I just posted the picture for him. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-03-2003, 07:06 PM	#10
Radiatta_71 Registered User Join Date: Jul 2002 Location: Vancouver, WA Posts: 117	It is in fact a 6" suspension lift. Superlift front springs and blocks in the rear. Give me your email address and I will email you some pictures of the cage and rusty areas.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.