Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-05-2011, 04:54 PM | #1 |
Registered User
Join Date: Jan 2011
Location: bermuda dunes california
Posts: 16
|
ignition switch replacement
ok so does anyone know how to replace the ignition switch on a 68 c10, ordered the new one but cant seem to figure out how to remove the old switch. any help would be appreciated. i will post some pictures in a little while. thanks again
|
02-05-2011, 05:32 PM | #2 |
Registered User
Join Date: Nov 2002
Location: Mt. Vernon, WA..
Posts: 2,325
|
Re: ignition switch replacement
put a paper clip in the little hole on the switch, turn it-can't remember which way- and the tumbler will come out.
|
02-05-2011, 06:19 PM | #3 |
member #16
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: ignition switch replacement
You have to remove the lock cyl. first. Turn switch to acc. position and insert wire into hole on face of lock and push in. You will feel a spring loaded pin as you push. Then turn cyl to the left and pull. You might have to wiggle it a bit , but it should pull out.
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ |
Bookmarks |
|
|