|
02-05-2011, 04:51 PM
|
#1 |
|
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
C35 front brakes
The front brakes on my dually feel a bit "grabby" but not when you lightly put the brakes on but when your nearing your stop. it's not affecting my ability to stop. but was never like this before it was parked for about a month or so.
any one ever ome across this? Also the front Pads have lots of life on them.
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
|
|
|
02-05-2011, 09:59 PM
|
#2 |
|
Registered User
Join Date: Jul 2010
Location: Lafayette, IN
Posts: 621
|
Re: C35 front brakes
I have the same problem on the opposite end. If the truck sits for even a couple of days the rear brakes will be grabby for about 3 or 4 stops. Then it goes away and it is fine as long as it is driven daily. I am kind of wondering if the proportioning valve is freezing up or something.
|
|
|
|
|
02-05-2011, 11:12 PM
|
#3 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,939
|
Re: C35 front brakes
Surface rust on the rotors causes them to work as if freshly turned w/a rougher surface. More friction = more bite.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
02-05-2011, 11:51 PM
|
#4 | |
|
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
Re: C35 front brakes
Quote:
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
|
|
|
|
|
02-05-2011, 11:59 PM
|
#5 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,939
|
Re: C35 front brakes
Typically returns to 'normal' once a few miles have passed & the brakes have been cycled a few times to knock the surface rust off.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
