Rebuilding 700r4...what HD parts?

[spudz]

raybestos z pac clutches, vett servo, superior shift correction package, trans go spacer plate, stock stall speed converter, beast sun shell, 5 pinion 4L65e style planets, wider kevlar band.. If you go to a kevlar band, ALTEAST put a vett servo if not a billet super servo. Because if you dont it will glide into second. The kevlar actually slips a little bit. Maybe a upgrade forward sprag and upgraded pump kit. But not necessary. I would check the line pressure before you tear it apart to make sure your pump is doing its job. The book to get to get a basic know how is...Besides gm service manuals, the book I use sometimes is called "GM AUTOMATIC TRANSMISSION OVERHAUL" its a haynes tech book. Gives step by step overhaul on 200r4,700r4, th350, th400 along with some front drive units. I built a few 4l60e/700r4s one 200r4 in my grand national and two 4t65e front drive transmissions... and beside a few common sense mistakes I had to correct. I have been lucky so far. I even tore down a Allison a few months ago to replace a cracked case.. As long as you got some tools, ability to read, clean work area... patients... etc. You can do it yourself.