Electrical Problems, oil pressure gage line - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ron · 07-05-2003, 04:25 PM

Subject vehicle is a 67 C-10. I have constant 12 volts to the right and left turn signals. Signals blink ok but when the turn signal lever is returned to nuetral position the bulb remains on. I have 12 volts at these wires even with the key off.

Also, I do not have the oil gage to engine block oil line and cannot find the correct combination of fittings to make a new one. Where can I get one? Thanks

McGillicutty · 07-05-2003, 05:52 PM

I got an oil line at the local parts store. They had both plastic and copper lines. The kit also had several different fittings with it.

Dean23 · 07-05-2003, 06:02 PM

seems to me u have a short in the wiring somewhere. make sure that oyur ground is good. I've seen grounds cause some weird faults.

Longhorn Man · 07-06-2003, 01:09 AM

Something sounds funny, you saying the turn signal indicators stay on even after shutting the eng off?

Ron · 07-06-2003, 01:47 AM

Yes, if the signal is in the right position the light will blink until you put the lever in the nutural position, than it will stay on. (Left signal does the same thing). Spent most of the day trying to figure this one out.

07-05-2003, 04:25 PM	#1
Ron Registered User Join Date: Feb 2000 Location: Zillah Wa. USA Posts: 394	Electrical Problems, oil pressure gage line Subject vehicle is a 67 C-10. I have constant 12 volts to the right and left turn signals. Signals blink ok but when the turn signal lever is returned to nuetral position the bulb remains on. I have 12 volts at these wires even with the key off. Also, I do not have the oil gage to engine block oil line and cannot find the correct combination of fittings to make a new one. Where can I get one? Thanks __________________ '69 SWB '76 International "Terra" "Hooked on holiday beer"

07-05-2003, 06:02 PM	#3
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	seems to me u have a short in the wiring somewhere. make sure that oyur ground is good. I've seen grounds cause some weird faults. __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

07-06-2003, 01:47 AM	#5
Ron Registered User Join Date: Feb 2000 Location: Zillah Wa. USA Posts: 394	Yes, if the signal is in the right position the light will blink until you put the lever in the nutural position, than it will stay on. (Left signal does the same thing). Spent most of the day trying to figure this one out. __________________ '69 SWB '76 International "Terra" "Hooked on holiday beer"

07-05-2003, 05:52 PM	#2
McGillicutty Registered User Join Date: Mar 2003 Location: Sioux Falls, SD Posts: 19	I got an oil line at the local parts store. They had both plastic and copper lines. The kit also had several different fittings with it.

07-06-2003, 01:09 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Something sounds funny, you saying the turn signal indicators stay on even after shutting the eng off?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.