Tech Tip, Square press nuts

[T Hilde]

I put this in my build thread but thought I would share it here too.

The square nuts for the inner fender sometimes twist out . This can make for a struggle to find something to fit. Well, since I didn't toss out the hacked up innners that were here I had some good ones.



Press them out with a large deep socket, bolt and c clamp.



Take a file dress the edges of the nut and the hole of the inner fender, test fit then sand the crud from around the opening. Hold it in place with bolt and a larger nut.



Weld it in, now 5 more to go.