Blazer windshield frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kman · 07-06-2003, 08:10 PM

Has anyone had any luck using a pu windshield frame on a blazer? What are the differences. I will be picking up the blazer this week lol
Kman

krue · 07-06-2003, 08:50 PM

Check with Gee Emm I believe he is doing the same.

Kman · 07-07-2003, 05:32 AM

yes I saw gee-emm has a replacement frame but I thought that it was a blazer frame not a pickup frame.thanks

*Gee_Emm* · 07-07-2003, 09:13 AM

If it is rotted on the inside then forget about using a PU frame. If it is good on the inside you may be able to piece together some of the parts but its not likely. Why isnt there a patch panel being made for this????

*Gee_Emm* · 07-07-2003, 09:17 AM

Here is a shot to give you an idea what it looks like under the top, notice the bump out in the middle.

bouncytruck · 07-07-2003, 11:25 AM

There is a board member who replaced their windshield frame with one from a pickup. They are running with a soft top so they just used flat metal on the backside where they cut off the top. I can't remember who it was though. I believe their Blazer is painted white. It may have been a CK5.com board member.

07-06-2003, 08:10 PM	#1
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	Blazer windshield frame/help! Has anyone had any luck using a pu windshield frame on a blazer? What are the differences. I will be picking up the blazer this week lol Kman __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect Last edited by Kman; 07-06-2003 at 08:17 PM.

07-06-2003, 08:50 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Check with Gee Emm I believe he is doing the same. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-07-2003, 05:32 AM	#3
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	yes I saw gee-emm has a replacement frame but I thought that it was a blazer frame not a pickup frame.thanks __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

07-07-2003, 11:25 AM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	There is a board member who replaced their windshield frame with one from a pickup. They are running with a soft top so they just used flat metal on the backside where they cut off the top. I can't remember who it was though. I believe their Blazer is painted white. It may have been a CK5.com board member. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-07-2003, 09:13 AM	#4
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	If it is rotted on the inside then forget about using a PU frame. If it is good on the inside you may be able to piece together some of the parts but its not likely. Why isnt there a patch panel being made for this????

07-07-2003, 09:17 AM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Here is a shot to give you an idea what it looks like under the top, notice the bump out in the middle.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.