Canada Dana 44 hubs and spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68chevyfuelie · 11-07-2010, 09:50 AM

Dana 44 small and large bearing splindles and hubs for sale. I am asking $25 per large bearing spindle, $50 per small bearing spindle. I'm asking $40 apiece on hubs. Prices are before shipping. The last 3 hubs I sold went to CO, AZ and KY, average cost to ship one hub was $35. Those were 3/4 ton hubs, the external hub style, definately heavier than the 6 stud ones. Last spindle I shipped was to SC, cost $22.

I only have 2 small bearing spindles available. I have a dozen large bearing spindles. I have a dozen of each size for 6 stud hubs. For external hub 8 stud I have 5, internal hub I think I have a few. External hubs can come with or without drive flanges, your call.
I also have a bunch of late-'72-81 style axleshafts, inners and stubs if anyone is interested.

Thanks all.

68chevyfuelie · 11-11-2010, 10:52 AM

bump

nyncompute · 11-11-2010, 11:12 AM

Any chance you have a nice straight tie rod for my 72?

68chevyfuelie · 11-11-2010, 07:40 PM

Like this one? I don't know, $40 plus shipping?

nyncompute · 11-11-2010, 08:51 PM

yepper. Do me a favor could you measure it off. I believe its about 52". What do you reckon shipping would be to 89144?
Thanks for the pics
Nyn

68chevyfuelie · 11-12-2010, 11:43 PM

I can measure it tomorrow. Shipping looks to be around $50 through Canada Post.

UPS quoted me around $100. ??

nyncompute · 11-13-2010, 01:37 AM

sheesh! Dang postage, I could come pick it up for that

Thanks for checking that measurement.

68chevyfuelie · 11-13-2010, 08:04 PM

52" from the sleeve end to sleeve end. (Sleeve end?? Where you thread the tie rod into).

Canada Post charges $1 extra to ship something in a tube....they don't have 52" long tubes, they have 36" long....

The UPS lady said it would be cheaper if I could fold it, or cut it in half.....

Who makes up these rules?

nyncompute · 11-13-2010, 08:20 PM

Pm sent

68chevyfuelie · 11-17-2010, 10:57 PM

bump

New torringtons installed/seal kits available for spindles.

68chevyfuelie · 11-21-2010, 09:26 PM

bumpski

68chevyfuelie · 12-02-2010, 03:09 PM

bumpalicious

68chevyfuelie · 01-31-2011, 10:32 PM

bumpity-bump

AlaskaMatt · 02-17-2011, 02:46 AM

Bookmarking. I am in need, but am going to check locally first.

kellytheaker · 02-17-2011, 07:45 AM

i will need your address , please and a telephone number , i think i could use some spindles and the tie rod . i would pick up . i am unsure what i have for spindles , and the dog has been chewing the blue centre in the hub and could use a locking hub .

68chevyfuelie · 02-17-2011, 10:15 AM

kelly, PM sent. Tie rod and most of the diff went last week, butI still have a shelf-full of hubs and spindles. I kept the original Spicer locking hubs.

AlaskaMatt, no hurry, I doubt I'm going to sell out tomorrow.

Locking hubs had one set of teeth that were getting worn, so I am including another set. (Thats why there are 3 rows of guts....)

Thanks!

kellytheaker · 02-17-2011, 05:46 PM

did you mean the hubs can be had or they were worn out ? i have one chewed badly ,

68chevyfuelie · 02-17-2011, 07:44 PM

The blue dials are in good shape. The parts in front of the spring is the mesh teeth I'm talking about, one was rounded on the one shoulder, whereas the other 2 sets were square.

I've got the spindles and wheel bearing hubs off the same diff as well as a matched pair. Thanks

kellytheaker · 02-17-2011, 09:28 PM

what value have you put on these three , ? thanks

68chevyfuelie · 02-17-2011, 09:41 PM

I am asking $100 to start with. If you're interested in other stuff I usually do better on pricing for package deals.

These aren't costing me money to sit on the shelf, but money talks...

kellytheaker · 02-17-2011, 09:52 PM

i am interested at a 50-60 value , and not trying to insult you . I am glad that i can at least drive over to pick them up . i am just in the guelph rockwood area and pleased to see another Canadian on the site . thanks

nu2-72 · 02-17-2011, 10:24 PM

Don't know if this would help you or not. Anyone near you sell carpet? They usually come on large cardboard tubes that might fit a tie rod and could be cut to length. ?? Rules are made to be bent.

68chevyfuelie · 02-18-2011, 10:26 AM

kelly, give me a call sometime, I'm sure we can work something out. You know John in Rockwood? 79 Ford guy?

nu-72, yes, thanks for the tip. I had tossed that idea around when I was looking at shipping the tie rod. Same with axleshafts, some stuff is hard to find a box for. Thanks though.

kellytheaker · 02-18-2011, 05:17 PM

yes i know of John - ihear he is the go to for ford - diesel swap and that classic year of truck - i think i heard bylaw is on him at present , i plow snow for the station next to his shop and he always complained about the small row of snow i left between him and the statio9n but he never plowed himself all season , so im seen as a goof in his eyes but he is finally doing his own removal on the property and it seems to have corrected the animosity . i will call thanks and glad you posted back .

11-07-2010, 09:50 AM	#1
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Dana 44 hubs and spindles Dana 44 small and large bearing splindles and hubs for sale. I am asking $25 per large bearing spindle, $50 per small bearing spindle. I'm asking $40 apiece on hubs. Prices are before shipping. The last 3 hubs I sold went to CO, AZ and KY, average cost to ship one hub was $35. Those were 3/4 ton hubs, the external hub style, definately heavier than the 6 stud ones. Last spindle I shipped was to SC, cost $22. I only have 2 small bearing spindles available. I have a dozen large bearing spindles. I have a dozen of each size for 6 stud hubs. For external hub 8 stud I have 5, internal hub I think I have a few. External hubs can come with or without drive flanges, your call. I also have a bunch of late-'72-81 style axleshafts, inners and stubs if anyone is interested. Thanks all. Attached Images

11-11-2010, 10:52 AM	#2
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles bump

11-11-2010, 11:12 AM	#3
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: Dana 44 hubs and spindles Any chance you have a nice straight tie rod for my 72? __________________ 1972 K-10 SWB Cheyenne

11-11-2010, 07:40 PM	#4
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles Like this one? I don't know, $40 plus shipping? Attached Images

11-11-2010, 08:51 PM	#5
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: Dana 44 hubs and spindles yepper. Do me a favor could you measure it off. I believe its about 52". What do you reckon shipping would be to 89144? Thanks for the pics Nyn __________________ 1972 K-10 SWB Cheyenne

11-12-2010, 11:43 PM	#6
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles I can measure it tomorrow. Shipping looks to be around $50 through Canada Post. UPS quoted me around $100. ??

11-13-2010, 01:37 AM	#7
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: Dana 44 hubs and spindles sheesh! Dang postage, I could come pick it up for that Thanks for checking that measurement. __________________ 1972 K-10 SWB Cheyenne

11-13-2010, 08:04 PM	#8
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles 52" from the sleeve end to sleeve end. (Sleeve end?? Where you thread the tie rod into). Canada Post charges $1 extra to ship something in a tube....they don't have 52" long tubes, they have 36" long.... The UPS lady said it would be cheaper if I could fold it, or cut it in half..... Who makes up these rules?

11-13-2010, 08:20 PM	#9
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: Dana 44 hubs and spindles Pm sent __________________ 1972 K-10 SWB Cheyenne

11-17-2010, 10:57 PM	#10
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles bump New torringtons installed/seal kits available for spindles.

11-21-2010, 09:26 PM	#11
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles bumpski

12-02-2010, 03:09 PM	#12
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles bumpalicious

01-31-2011, 10:32 PM	#13
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles bumpity-bump

02-17-2011, 02:46 AM	#14
AlaskaMatt Registered User Join Date: Apr 2010 Location: AK Posts: 198	Re: Dana 44 hubs and spindles Bookmarking. I am in need, but am going to check locally first. __________________ Thanks, Matt My Website

02-17-2011, 07:45 AM	#15
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Dana 44 hubs and spindles i will need your address , please and a telephone number , i think i could use some spindles and the tie rod . i would pick up . i am unsure what i have for spindles , and the dog has been chewing the blue centre in the hub and could use a locking hub .



Register or Log In To remove these advertisements.

02-17-2011, 10:15 AM	#16
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles kelly, PM sent. Tie rod and most of the diff went last week, butI still have a shelf-full of hubs and spindles. I kept the original Spicer locking hubs. AlaskaMatt, no hurry, I doubt I'm going to sell out tomorrow. Locking hubs had one set of teeth that were getting worn, so I am including another set. (Thats why there are 3 rows of guts....) Thanks! Attached Images

02-17-2011, 05:46 PM	#17
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Dana 44 hubs and spindles did you mean the hubs can be had or they were worn out ? i have one chewed badly ,

02-17-2011, 07:44 PM	#18
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles The blue dials are in good shape. The parts in front of the spring is the mesh teeth I'm talking about, one was rounded on the one shoulder, whereas the other 2 sets were square. I've got the spindles and wheel bearing hubs off the same diff as well as a matched pair. Thanks Attached Images

02-17-2011, 09:28 PM	#19
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Dana 44 hubs and spindles what value have you put on these three , ? thanks

02-17-2011, 09:41 PM	#20
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles I am asking $100 to start with. If you're interested in other stuff I usually do better on pricing for package deals. These aren't costing me money to sit on the shelf, but money talks...

02-17-2011, 09:52 PM	#21
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Dana 44 hubs and spindles i am interested at a 50-60 value , and not trying to insult you . I am glad that i can at least drive over to pick them up . i am just in the guelph rockwood area and pleased to see another Canadian on the site . thanks

02-17-2011, 10:24 PM	#22
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: Dana 44 hubs and spindles Don't know if this would help you or not. Anyone near you sell carpet? They usually come on large cardboard tubes that might fit a tie rod and could be cut to length. ?? Rules are made to be bent. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

02-18-2011, 10:26 AM	#23
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Dana 44 hubs and spindles kelly, give me a call sometime, I'm sure we can work something out. You know John in Rockwood? 79 Ford guy? nu-72, yes, thanks for the tip. I had tossed that idea around when I was looking at shipping the tie rod. Same with axleshafts, some stuff is hard to find a box for. Thanks though.

02-18-2011, 05:17 PM	#24
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Dana 44 hubs and spindles yes i know of John - ihear he is the go to for ford - diesel swap and that classic year of truck - i think i heard bylaw is on him at present , i plow snow for the station next to his shop and he always complained about the small row of snow i left between him and the statio9n but he never plowed himself all season , so im seen as a goof in his eyes but he is finally doing his own removal on the property and it seems to have corrected the animosity . i will call thanks and glad you posted back .

Register or Log In To remove these advertisements.